The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.
slendr is a toolbox for running population genomic simulations entirely in R. Our original motivation for developing it was to provide a framework for simulating spatially-explicit genomic data on real geographic landscapes, however, it has grown to be much more than that since then: slendr can now simulate data from traditional, non-spatial demographic models using msprime as a simulation engine, and it even supports selection scenarios via user-defined SLiM estension snippets. In addition to model definition and simulation, slendr also provides a set of function for efficient analysis of tree-sequence genomic data, utilizing the tskit module for underlying computation.
This page briefly summarizes slendr’s most important features. A more detailed description of the slendr architecture and an extensive set of practical code examples can be found in our paper in the PCI journal and on our website.
The slendr paper is now published in the Peer Community Journal!
If you use slendr in your work, please cite it as:
Petr, Martin; Haller, Benjamin C.; Ralph, Peter L.; Racimo, Fernando. slendr: a framework for spatio-temporal population genomic simulations on geographic landscapes. Peer Community Journal, Volume 3 (2023), article no. e121. doi : 10.24072/pcjournal.354.
Citations help me justify further development and fixing bugs! Thank you! ❤️
Here is a brief summary of slendr’s most important features. The R package allows you to:
Program demographic models, including population splits, population size changes, and gene-flow events using an extremely simple declarative language entirely in R (see this vignette for an example of the model-definition interface). Even complex models can be written with only a very little code and require only a bare minimum of R programming knowledge (the only thing the user needs to know is how to call an R function and what does an R data frame look like).
Execute slendr models using efficient, tailor-made SLiM or msprime simulation scripts which are bundled with the R package. Both of these simulation engines save outputs in the form of an efficient tree-sequence data structure. No SLiM or msprime programming is needed!
Load, process, and analyse tree-sequence outputs via slendr’s built-in R interface to the tree-sequence library tskit. You can compute many population genetic statistics in R immediately after the simulation finishes directly on the output tree sequences, without having to convert files to other formats (VCF, EIGENSTRAT) for analysis in different software.
Although it originally assumed neutrality of simulated models, slendr now provides a simple extension mechanism for customization of SLiM-based models using user-defined SLiM code. Simulations of selection models of arbitrary complexity is now entirely possible.
Schedule sampling events which specify how many individuals’ genomes, from which populations, and at which times (optionally, at which locations) should be recorded by the simulation engine (SLiM or msprime) in the output tree-sequence files.
Encode complex models of population movements on a landscape (see a brief example of such model here, and a more extended explanation in this tutorial). No knowledge of cartographic or geospatial analysis concepts is needed.
Simulate these dynamic spatial demographic models using SLiM’s continuous-space simulation capabilities directly in R (again, no SLiM programming required). The outputs from such simulations are saved as tree sequences and can be analysed using standard R geospatial data analysis libraries. This is because slendr performs the conversion of tree sequence tables to the appropriate spatial R data type automatically.
Specify within-population individual dispersal dynamics from the R interface by leveraging SLiM’s individual interaction parameters implemented in the SLiM back-end script.
Utilizing the flexibility of R with its wealth of libraries for statistics, geospatial analysis and graphics, and combining it with the power of population genetic simulation frameworks SLiM and msprime, the slendr R package makes it possible to write entire simulation and analytic pipelines without the need to leave the R environment.
You can open an RStudio session and test examples from the vignettes directly in your web browser by clicking this button (no installation is needed!):
In case the RStudio instance appears to be starting very slowly, please be patient (Binder is a freely available service with limited computational resources provided by the community). If Binder crashes, try reloading the web page, which will restart the cloud session.
Once you get a browser-based RStudio session, you can navigate to the
vignettes/ directory and test the examples on your own!
slendr is now available CRAN which means that you can
install it simply by entering install.packages("slendr")
into your R console.
If you would like to test the latest features of the software
(perhaps because you need some bug fixes), you can install it with
devtools::install_github("bodkan/slendr") (note that this
requires the R package devtools).
⚠️⚠️⚠️
Note: the default slendr installation no
longer has a hard dependency on geospatial R packages sf,
stars, and rnaturalearth. If you indend to use
slendr for spatial genomic simulations and data analysis, you
have to run
install.packages(c("sf", "stars", "rnaturalearth"))
first.
⚠️⚠️⚠️
This software is under active development!
If you would like to stay updated:
Click on the “Watch” button on the project’s GitHub website.
Follow me on social media where I will be posting progress updates (you can find links on my homepage).
From time to time, take a look at the changelog where I will post updates on new features, breaking changes, etc.
Here is a very brief demonstration of the kind of spatial model which slendr has been originally designed to simulate data from. Please note that although this is a spatially-explicit population genetic model, slendr has an extensive support for traditional, non-spatial simulations as well. Furthermore, this example only shows how to specify and simulate a model in R. It doesn’t show how to analyse tree-sequence outputs and compute population genetic statistics from them (this important feature is demonstrated in this tutorial).
Imagine that we wanted to simulate spatio-temporal genomic data from a toy model of the history of modern humans in West Eurasia after the Out of Africa migration.
First, we define the spatial context of the simulation. This will represent the “world” which will be occupied by populations in our model.
library(slendr)
# this sets up internal Python environment and needs to be ran only once!
# (do not put this in your R scripts, run this command in the R console
# after you (re-)install slendr)
setup_env()
# activate the internal Python environment needed for simulation and
# tree-sequence processing
init_env()
map <- world(
xrange = c(-13, 70), # min-max longitude
yrange = c(18, 65), # min-max latitude
crs = "EPSG:3035" # coordinate reference system (CRS) for West Eurasia
)We can visualize the defined world map using the function
plot_map provided by the package.
plot_map(map)
Although in this example we use a real Earth landscape, the
map can be completely abstract (either blank or with
user-defined landscape features such as continents, islands, corridors
and barriers).
In order to make the definitions of population ranges (below) easier,
we can define smaller regions on the map using the function
region.
Note that all coordinates in slendr are specified in the geographic coordinate system (i.e., degrees longitude and latitude), but are internally represented in a projected CRS (in our case, EPSG 3035 as specified above).
This makes it easier for us to define spatial features simply by reading the coordinates from a regular map but the internal projected CRS makes simulations more accurate (distances and shapes are not distorted because we can use a CRS tailored to the region of the world we are working with). The projected CRS takes care of the projection of the part of the world we’re interested in from the three-dimensional Earth surface to a two-dimensional map.
africa <- region(
"Africa", map,
polygon = list(c(-18, 20), c(38, 20), c(30, 33),
c(20, 33), c(10, 38), c(-6, 35))
)
europe <- region(
"Europe", map,
polygon = list(
c(-8, 35), c(-5, 36), c(10, 38), c(20, 35), c(25, 35),
c(33, 45), c(20, 58), c(-5, 60), c(-15, 50)
)
)
anatolia <- region(
"Anatolia", map,
polygon = list(c(28, 35), c(40, 35), c(42, 40),
c(30, 43), c(27, 40), c(25, 38))
)Again, we can use the generic plot_map function to
visualize these objects, making sure we specified them correctly:
plot_map(africa, europe, anatolia)
The most important function in the slendr package is
population(), which is used to define names, split times,
sizes and spatial ranges of populations. Here, we specify times in years
before the present, distances in kilometers. If this makes more sense
for your models, times can also be given in a forward direction.
You will also note functions such as move() or
expand_range() which are designed to take a slendr
population object and schedule its spatial dynamics at appropriate times
during the model simulation (which will happen at a later step).
Note that in order to make this example executable in a reasonable time on my extremely old laptop, I decreased the sizes of all populations to unrealistic levels. This will speed up the SLiM simulation at a later step.
afr <- population( # African ancestral population
"AFR", time = 52000, N = 3000, map = map, polygon = africa
)
ooa <- population( # population of the first migrants out of Africa
"OOA", parent = afr, time = 51000, N = 500, remove = 25000,
center = c(33, 30), radius = 400e3
) %>%
move(
trajectory = list(c(40, 30), c(50, 30), c(60, 40)),
start = 50000, end = 40000, snapshots = 20
)
ehg <- population( # Eastern hunter-gatherers
"EHG", parent = ooa, time = 28000, N = 1000, remove = 6000,
polygon = list(
c(26, 55), c(38, 53), c(48, 53), c(60, 53),
c(60, 60), c(48, 63), c(38, 63), c(26, 60))
)
eur <- population( # European population
name = "EUR", parent = ehg, time = 25000, N = 2000,
polygon = europe
)
ana <- population( # Anatolian farmers
name = "ANA", time = 28000, N = 3000, parent = ooa, remove = 4000,
center = c(34, 38), radius = 500e3, polygon = anatolia
) %>%
expand_range( # expand the range by 2.500 km
by = 2500e3, start = 10000, end = 7000,
polygon = join(europe, anatolia), snapshots = 20
)
yam <- population( # Yamnaya steppe population
name = "YAM", time = 7000, N = 500, parent = ehg, remove = 2500,
polygon = list(c(26, 50), c(38, 49), c(48, 50),
c(48, 56), c(38, 59), c(26, 56))
) %>%
move(trajectory = list(c(15, 50)), start = 5000, end = 3000, snapshots = 10)We can use the function plot_map again to get a
“compressed” overview of all spatio-temporal range dynamics encoded by
the model so far (prior to the simulation itself).
plot_map(afr, ooa, ehg, eur, ana, yam)
By default, populations in slendr do not mix even if they
are overlapping. In order to schedule an gene-flow event between two
populations, we can use the function gene_flow. If we want
to specify multiple such events at once, we can collect these events in
a simple R list:
gf <- list(
gene_flow(from = ana, to = yam, rate = 0.5, start = 6500, end = 6400, overlap = FALSE),
gene_flow(from = ana, to = eur, rate = 0.5, start = 8000, end = 6000),
gene_flow(from = yam, to = eur, rate = 0.75, start = 4000, end = 3000)
)Before we run the simulation, we compile all individual model components (population objects and gene-flow events) to a single R object, specifying some additional model parameters. Additionally, this performs internal consistency checks, making sure the model parameters (split times, gene flow times, etc.) make sense before the (potentially quite computationally costly) simulation is even run.
model <- compile_model(
populations = list(afr, ooa, ehg, eur, ana, yam), # populations defined above
gene_flow = gf,
generation_time = 30,
resolution = 10e3, # resolution in meters per pixel
competition = 130e3, mating = 100e3, # spatial interaction parameters
dispersal = 70e3, # how far can offspring end up from their parents
)Compiled model is kept as an R object which can be passed to
different functions. In this example, we will simulate data with the
slim() engine (but we could also run the simulation through
the coalescent engine via the msprime() function).
The package provides an R
shiny-based browser app explore_model() for checking
the model dynamics interactively and visually. For more complex models,
this is much better than static spatial plots such as the one we showed
in step 2 above:
explore_model(model)The function has two modes:
Finally, we can execute the compiled model in SLiM. Here we run the
simulation in a batch mode, but we could also run it in SLiMgui by
setting method = "gui". This would allow us to inspect the
spatial simulation as it happens in real time.
The slim function generates a complete SLiM script
tailored to run the spatial model we defined above. This saves you, the
user, a tremendous amount of time, because you don’t have to write new
SLiM code every time you design a new demographic model. The output of
the simulation run from any slendr model is always a tree sequence, here loaded into an
object ts_slim.
ts_slim <- slim(model, sequence_length = 10e6, recombination_rate = 1e-8,
method = "batch", random_seed = 314159)As specified here, slendr’s SLiM backend will simulate 10 Mb of sequence for each individual, and produce a tree sequence output from the simulation run which can be analysed by many built-in population genetic functions. By default, all individuals living at the end of the simulation are recorded as samples in the tree sequence. If a specific set of samples (ancient and modern) is needed, this can be defined accordingly using a dedicated function.
Note that although we defined a spatial model, we could have just as
easily simulated standard, non-spatial data by running the same model
through slendr’s msprime() back end without the
need to make any changes:
ts_msprime <- msprime(model, sequence_length = 10e6, recombination_rate = 1e-8)Here is a very quick overview of the SLiM simulation run summarised as a GIF animation. Again, please note that the simulation is extremely simplified. We only simulated a very small number of individuals in each population, and we also didn’t specify any dispersal dynamics which is why the populations look so clumped.
animate_model(model = model, file = locations_file, steps = 50, width = 500, height = 300)
#> Error in eval(expr, envir, enclos): R: UnableToWritePixelCache `/var/folders/70/b_q2zdh116b9pfg29p03sx600000gn/T//RtmpyLwlps/magick-UHJ_3VsqZdrkY5sTCDUuYTjjSKmibs4k': No space left on device @ error/cache.c/WritePixelCachePixels/6023At this point, you could either compute some population genetic statistics of interest or perhaps analyse the spatial features of the genealogies simulated by your model.
The example above provides only a very brief and incomplete overview of the full functionality of the slendr package. There is much more to slendr than what we demonstrated here. For instance:
You can tweak parameters influencing dispersal dynamics (how “clumpy” populations are, how far can offspring migrate from their parents, etc.) and define how these should change over time. For instance, you can see that in the animation above, the African population forms a single “blob” that really isn’t spread out across its entire population range. Tweaking the dispersal parameters as show this vignette helps avoid that.
You can use slendr to program non-spatial models, which means that any conceivable traditional, random-mating demographic model can be simulated with only a few lines of R code. You can learn more in this vignette (and in more detail in this vignette). Because SLiM simulations can be often quite slow compared to their coalescent counterparts, we also provide functionality allowing to simulate slendr models (without any change!) using a built-in msprime back end script. See this vignette for a tutorial on how this works.
You can extend traditional, non-spatial SLiM-based slendr models with customized SLiM code and simulate various selection scenarios supported by SLiM while still leveraging slendr’s easy-to-use interface for programming demographic models.
You can build complex spatial models which are still abstract (not assuming any real geographic location), including traditional simulations of demes in a lattice structure. A complete example is shown this vignette.
Because slendr & SLiM save data in a tree-sequence file format, thanks to the R package reticulate for interfacing with Python code, we have the full power of tskit and pyslim for manipulating tree-sequence data right at our fingertips, all within the convenient environment of R. An extended example can be found in this vignette.
For spatially explicit population models, the slendr package automatically converts the simulated output data to a format which makes it possible to analyse it with many available R packages for geospatial data analysis. A brief description of this functionality can be found in this vignette.
You can find complete reproducible code behind the examples in our paper in a dedicated R vignette here.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.