The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.
This short tutorial presents some of the possible genetic settings one could simulate, but it certainly does not explore all the possibilities. For more information on specific input parameters, please check the help documentation (?create_phenotypes).
In order to install simplePHENOTYPES, the following r packages will also be installed:
setRepositories(ind = 1:2)
::install_github("samuelbfernandes/simplePHENOTYPES", build_vignettes = TRUE) devtools
Note that the data set used in all vignettes is already in numeric
format. In addition to the numeric format, simplePHENOTYPES’ parameter
geno_obj
also takes an R object in HapMap format as input.
Other input options are VCF, GDS, and Plink bed/ped. These last formats
should be loaded from file with geno_file
or
geno_path
.
library(simplePHENOTYPES)
data("SNP55K_maize282_maf04")
1:8, 1:10] SNP55K_maize282_maf04[
The simplest option is the simulation of univariate traits. In the
example below, we are simulating ten single trait experiments with a
heritability of 0.7. In this setting, the simulated trait is controlled
by one large-effect QTN (big_add_QTN_effect = 0.9
) and two
small effect QTNs. The additive effects of these last two QTNs follow a
geometric series starting with 0.2. Thus, the effect size of the first
of these two QTNs is 0.2, and the effect size of the second is
0.22. Results are being saved at a temporary directory
(home_dir = tempdir()
). Please see help files
(?create_phenotypes) to see which default values are being used.
create_phenotypes(
geno_obj = SNP55K_maize282_maf04,
add_QTN_num = 3,
add_effect = 0.2,
big_add_QTN_effect = 0.9,
rep = 10,
h2 = 0.7,
model = "A",
home_dir = tempdir())
simplePHENOTYPES provides three multi-trait simulation scenarios:
pleiotropy, partial pleiotropy, and spurious pleiotropy. In this
example, we are simulating three (ntraits = 3
) pleiotropic
(architecture = "pleiotropic"
) trait controlled by three
additive and four dominance QTNs. The effect size of the largest-effect
additive QTN is 0.3 for all traits
(big_add_QTN_effect = c(0.3, 0.3, 0.3)
), while the additive
and dominance effect sizes are 0.04, 0.2, and 0.1 for each trait,
respectively. Heritability for trait_1 is 0.2, while the heritability of
the two correlated traits is 0.4. Each replicate is being recorded in a
different file (output_format = "multi-file"
) in a folder
named “Results_Pleiotropic”. In this setting, we do not specify the
correlation between traits; instead, the observed (realized) correlation
is an artifact of different allelic effects for each trait. The same
QTNs are used to generate phenotypes in all ten replications
(vary_QTN = FALSE
)(default); alternatively, we could select
different QTNs in each replicate using vary_QTN = TRUE
. As
mentioned above, the first QTN of each trait will get the effect
provided by big_add_QTN_effect; all other QTNs will have the effect size
assigned by add_effect
and dom_effect
. The
vector add_effect
contains one allelic effect for each
trait, and a geometric series (default) is being used to generate
allelic effects for each one of the two additive QTNs
(add_QTN_num = 3
) and three dominance QTNs
(dom_QTN_num = 4
). All results will be saved to file, and a
data.frame with all phenotypes will be assigned to an object called
“test1” (to_r = TRUE).
<- create_phenotypes(
test1 geno_obj = SNP55K_maize282_maf04,
add_QTN_num = 3,
dom_QTN_num = 4,
big_add_QTN_effect = c(0.3, 0.3, 0.3),
h2 = c(0.2, 0.4, 0.4),
add_effect = c(0.04,0.2,0.1),
dom_effect = c(0.04,0.2,0.1),
ntraits = 3,
rep = 10,
vary_QTN = FALSE,
output_format = "multi-file",
architecture = "pleiotropic",
output_dir = "Results_Pleiotropic",
to_r = TRUE,
seed = 10,
model = "AD",
sim_method = "geometric",
home_dir = tempdir()
)
Optionally, we may input a list of allelic effects
(sim_method = "custom"
). In the example below, a geometric
series (custom_geometric) is being assigned and should generate the same
simulated data as the previous example (all.equal(test1, test2)). Notice
that since big_add_QTN_effect
is non-NULL, we only need to
provide effects for two out of the three simulated additive QTNs. On the
other hand, all four dominance QTN must have an effect assigned on the
custom_geometric_d list. Importantly, the allelic effects are assigned
to each trait based on the order they appear in the list and not based
on the names, i.e., ‘trait_1’, ‘trait_2’, and ‘trait_3’.
<- list(trait_1 = c(0.04, 0.0016),
custom_geometric_a trait_2 = c(0.2, 0.04),
trait_3 = c(0.1, 0.01))
<- list(trait_1 = c(0.04, 0.0016, 6.4e-05, 2.56e-06),
custom_geometric_d trait_2 = c(0.2, 0.04, 0.008, 0.0016),
trait_3 = c(0.1, 0.01, 0.001, 1e-04))
<- create_phenotypes(
test2 geno_obj = SNP55K_maize282_maf04,
add_QTN_num = 3,
dom_QTN_num = 4,
big_add_QTN_effect = c(0.3, 0.3, 0.3),
h2 = c(0.2,0.4, 0.4),
add_effect = custom_geometric_a,
dom_effect = custom_geometric_d,
ntraits = 3,
rep = 10,
vary_QTN = FALSE,
output_format = "multi-file",
architecture = "pleiotropic",
output_dir = "Results_Pleiotropic",
to_r = T,
sim_method = "custom",
seed = 10,
model = "AD",
home_dir = tempdir()
)
all.equal(test1, test2)
In this example, we simulate 20 replicates of three partially
pleiotropic traits (architecture = "partially"
), which are
respectively controlled by seven, 13, and four QTNs. All QTNs will have
additive effects that follow a geometric series, where the effect size
of the ith QTN is add_effect^i. For instance, trait_2 is
controlled by three pleiotropic additive QTNs and ten trait-specific
additive QTNs; consequently, the first pleiotropic additive QTN will
have an additive effect of 0.33 and the 13th trait-specific
additive QTN will have an effect of 0.3313. Correlation among
traits is assigned to be equal to the cor_matrix object. All 20
replicates of these three simulated traits will be saved in one file,
specifically in a long format and with an additional column named “Rep”.
Results will be saved in a directory called “Results_Partially”. In this
example, the genotype file will also be saved in numeric format.
<- matrix(c( 1, 0.3, -0.9,
cor_matrix 0.3, 1, -0.5,
-0.9, -0.5, 1 ), 3)
<- create_phenotypes(
sim_results geno_obj = SNP55K_maize282_maf04,
ntraits = 3,
pleio_a = 3,
pleio_e = 2,
same_add_dom_QTN = TRUE,
degree_of_dom = 0.5,
trait_spec_a_QTN_num = c(4, 10, 1),
trait_spec_e_QTN_num = c(3, 2, 5),
h2 = c(0.2, 0.4, 0.8),
add_effect = c(0.5, 0.33, 0.2),
epi_effect = c(0.3, 0.3, 0.3),
epi_interaction = 2,
cor = cor_matrix,
rep = 20,
output_dir = "Results_Partially",
output_format = "long",
architecture = "partially",
out_geno = "numeric",
to_r = TRUE,
model = "AE",
home_dir = tempdir()
)
Another architecture implemented is Spurious Pleiotropy. In this
case, we have two options: direct or indirect LD
(type_of_ld = "indirect"
). In the example below, we
simulate a case of indirect LD with five replicates of two traits
controlled by three additive QTNs each. For each QTN, a marker is first
selected (intermediate marker), and then two separate markers (one
upstream and another downstream) are picked to be QTNs for each of the
two traits. This QTN selection is based on an r2 threshold of
at most 0.8 (ld_max=0.8
) with the intermediate marker. The
three QTNs will have additive effects that follow a geometric series,
where the effect size of the ith QTN is 0.02i for
one trait and 0.05i for the other trait. Starting seed number
is 200, and output phenotypes are saved in one file, but in a “wide”
format with each replicate of two traits being added as additional
columns. Plink fam, bim, and bed files are also saved at Results_LD.
create_phenotypes(
geno_obj = SNP55K_maize282_maf04,
add_QTN_num = 3,
h2 = c(0.2, 0.4),
add_effect = c(0.02, 0.05),
rep = 5,
seed = 200,
output_format = "wide",
architecture = "LD",
output_dir = "Results_LD",
out_geno = "plink",
remove_QTN = TRUE,
ld_max =0.8,
ld_min =0.2,
model = "A",
ld_method = "composite",
type_of_ld = "indirect",
home_dir = tempdir()
)
The example below simulates five replicates of three traits. In each
replicate, different SNPs are selected to be the QTNs for each
experiment (vary_QTN = TRUE
). These traits are controlled
by three pleiotropic (pleio = 3
) additive and dominance
QTNs (same_add_dom_QTN = TRUE
and
degree_of_dom = 1
); two pleiotropic epistatic QTNs
(pleio_e = 2
); four, ten and one trait-specific additive
and dominance QTNs (trait_spec_a_QTN_num = c(4, 10, 1)
);
and two, one and five epistatic trait-specific epistatic QTNs
(trait_spec_e_QTN_num = c(2, 1, 5)
). In addition to the
default parameters, each genetic architecture may be simulated with many
auxiliary features. For instance, we may be interested in outputting the
amount of variance explained by each simulated QTN
(QTN_variance = TRUE
) or setting a residual correlation
between traits (cor_res = residual
) and thus, change the
default option of independent residuals. Notice that in this example,
the heritability is a 2x3 matrix (h2 = heritability
). Each
column of the matrix “heritability” will be assigned to a different
trait. In this case, simplePHENOTYPES will loop over each row of
h2
, keeping all other variables constant. Since rep = 5 and
nrow(h2) = 2, ten experiments will be simulated and saved in separate
files. Simulated results will be saved as “.fam” files used as GEMMA
input. Simultaneously, one genotypic file without the QTNs for the
simulated traits will be saved for each replication. Due to the option
vary_QTN = TRUE
, each experiment will be simulated with
different QTNs; thus, if we opt for remove_QTN = TRUE
, many
potentially large files will be saved in the output_dir folder. By
default, simplePHENOTYPES will ask us if all these files should be
saved. To avoid this question, we may use
warning_file_saver = FALSE
. In the present example, ten
plink bed files (which is also the input for GEMMA) are saved. Genotypic
files for rep one will be named
SNP55K_maize282_maf04_noQTN_rep_1.bed
,
SNP55K_maize282_maf04_noQTN_rep_1.bim
, and
SNP55K_maize282_maf04_noQTN_rep_1.fam
, whereas the
phenotypic file will be saved as
Simulated_Data__Rep1_Herit_0.2_0.8_0.7.fam
. Importantly,
the file SNP55K_maize282_maf04_noQTN_rep_1.fam
does not
contain the phenotypic data and needs to be replaced by
Simulated_Data__Rep1_Herit_0.2_0.8_0.7.fam
prior to its use
by GEMMA or other software that uses bed files. A parameter particularly
useful, especially when simulating dominance, is
constraints
. Here we only “include” heterozygote SNPs to be
used as QTNs (
constraints = list(maf_above = 0.3, maf_below = 0.44, hets = "include")
).
Optionally, we may “remove” all the heterozygotes from consideration.
The other constrain options used here are to select only QTNs with minor
allele frequency between 0.3 and 0.44.
<- matrix(c(1, 0.1,-0.2,
residual 0.1, 1,-0.1,-0.2,-0.1, 1), 3)
<- matrix(c(0.2, 0.4, 0.8,
heritability 0.6, 0.7, 0.2), 2)
create_phenotypes(
geno_obj = SNP55K_maize282_maf04,
pleio_a = 3,
pleio_e = 2,
same_add_dom_QTN = TRUE,
degree_of_dom = 1,
trait_spec_a_QTN_num = c(4, 10, 1),
trait_spec_e_QTN_num = c(2, 1, 5),
epi_effect = c(0.01, 0.4, 0.2),
add_effect = c(0.3, 0.2, 0.5),
h2 = heritability,
ntraits = 3,
rep = 5,
vary_QTN = TRUE,
warning_file_saver = FALSE,
output_dir = "Results_Partially_ADE",
output_format = "gemma",
architecture = "partially",
model = "ADE",
QTN_variance = TRUE,
remove_QTN = TRUE,
home_dir = tempdir(),
constraints = list(
maf_above = 0.3,
maf_below = 0.44,
hets = "include"
),cor_res = residual
)
As of the version 1.2.15
, it is also possible to select
what markers will be used as QTNS. The arguments QTN_list
takes a lists of additive, dominance or epistatic QTNs. In the example
below, the SNP ss196523212
is selected to be the additive
QTN. Another argument that is exemplified below is
epi_interaction
. It defines the number of markers to be
involved in an epistatic interaction. The parameter
out_geno
is defining that the marker data used in the
simulation will be exported as plink BED files.
<- list()
QTN_list $add[[1]] <- c("ss196523212")
QTN_list$dom[[1]] <- c("ss196510214", "ss196472187")
QTN_list$epi[[1]] <- c("ss196530605", "ss196475446")
QTN_listcreate_phenotypes(
geno_obj = SNP55K_maize282_maf04,
add_QTN_num = 1,
dom_QTN_num = 2,
epi_QTN_num = 1,
epi_interaction = 2,
h2 = c(0.92, 0.4) ,
add_effect = c(0.90, 0.2),
dom_effect = c(0.01, 0.3),
epi_effect = c(-0.3, 0.7),
ntraits = 2,
QTN_list = QTN_list,
rep = 1,
output_format = "gemma",
out_geno = "BED",
output_dir = "output_data",
model = "ADE",
home_dir = getwd()
)
If files are saved by chromosome, they can be read directly into
create_phenotypes using options geno_path
(recommendation:
consider having all marker data files in a separate folder). If multiple
files are saved in the same folder as the marker data, the parameter
prefix
might be used to select only the marker data. For
example, if your data is saved as “WGS_chrm_1.hmp.txt”, …,
“WGS_chrm_10.hmp.txt”, one would use prefix = "WGS_chrm_"
.
create_phenotypes(
geno_path = "PATH/TO/FILE",
prefix = "WGS_chrm_",
add_QTN_num = 3,
h2 = 0.2,
add_effect = 0.02,
rep = 5,
seed = 200,
output_format = "gemma",
output_dir = "Results",
model = "ADE",
home_dir = tempdir()
)
Questions, suggestions, and bug reports are welcome and appreciated. Please use GitHub issues for bug reports and the simplePHENOTYPES forum for questions and discussions: https://groups.google.com/forum/#!forum/simplephenotypes
Author: Samuel B Fernandes and Alexander E Lipka
Contact: samuelf@illinois.edu or fernandessb101@gmail.com
Institution: University of Illinois at Urbana-Champaign
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.