The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.
semPower is an R-package that provides several functions to perform a-priori, compromise, and post-hoc power analyses for structural equation models (SEM).
(Very) basic functionality is also provided as a shiny app, which you can use online at https://sempower.shinyapps.io/sempower.
semPower can be installed via CRAN. The CRAN
version often lags behind the development version, which can be
installed as follows:
# install.packages("devtools")
devtools::install_github("moshagen/semPower")Find a detailed manual at https://moshagen.github.io/semPower/.
We also recommend this in-depth tutorial on power analyses in SEM using a previous version of semPower. Although some information are outdated, this provides a detailed description on generic model based power analysis:
Jobst, L., Bader, M., & Moshagen, M. (2023). A Tutorial on Assessing Statistical Power and Determining Sample Size for Structural Equation Models. Psychological Methods, 28, 207-221. https://doi.org/10.1037/met0000423 preprint
If you use semPower in publications, please cite the
package as follows:
Moshagen, M., & Bader, M. (2023). semPower: General Power Analysis for Structural Equation Models. Behavior Research Methods, 56, 2901-2922. https://doi.org/10.3758/s13428-023-02254-7
Determine the required sample size to detect misspecifications of a model (involving df = 100 degrees of freedom) corresponding to RMSEA = .05 with a power of 80% on an alpha error of .05:
ap <- semPower.aPriori(effect = .05, effect.measure = 'RMSEA',
alpha = .05, power = .80, df = 100)
summary(ap)Determine the achieved power with a sample size of N = 1000 to detect misspecifications of a model (involving df = 100 degrees of freedom) corresponding to RMSEA = .05 on an alpha error of .05:
ph <- semPower.postHoc(effect = .05, effect.measure = 'RMSEA',
alpha = .05, N = 1000, df = 100)
summary(ph)Determine the critical chi-square such that the associated alpha and beta errors are equal, assuming sample size of N = 1000, a model involving df = 100 degrees of freedom, and misspecifications corresponding to RMSEA = .05:
cp <- semPower.compromise(effect = .05, effect.measure = 'RMSEA',
abratio = 1, N = 1000, df = 100)
summary(cp)Plot power as function of the sample size to detect misspecifications corresponding to RMSEA = .05 (assuming df = 100) on alpha = .05:
semPower.powerPlot.byN(effect = .05, effect.measure = 'RMSEA',
alpha = .05, df = 100, power.min = .05, power.max = .99)Plot power as function of the magnitude of effect (measured through the RMSEA assuming df = 100) at N = 500 on alpha = .05:
semPower.powerPlot.byEffect(effect.measure = 'RMSEA', alpha = .05, N = 500,
df = 100, effect.min = .001, effect.max = .10)Obtain the df of a model provided as lavaan model string (this requires the lavaan package):
lavModel <- '
f1 =~ x1 + x2 + x3
f2 =~ x4 + x5 + x6
'
semPower.getDf(lavModel)Determine the required sample size to discriminate a model exhibiting an RMSEA of .04 on 44 df from a model with RMSEA = .05 on 41 df with a power of 80% on an alpha error of .05:
ap <- semPower.aPriori(effect = c(.04, .05), effect.measure = 'RMSEA',
alpha = .05, power = .80, df = c(44, 41))
summary(ap)See the manual for details.
All the following examples determine the required sample size to
detect the specified effect (a priori power analysis) with a power of
80% on alpha .05 and define the measurement model via the
loadings argument. See the manual
for details and for other ways to specify the measurement model.
Determine sample size to detect that a correlation between the first and the second factor of at least .3 differs from zero:
Phi <- matrix(c(
c(1, .3, .4, .5),
c(.3, 1, .2, .6),
c(.4, .2, 1, .1),
c(.5, .6, .1, 1)
), ncol = 4, byrow = TRUE)
powerCFA <- semPower.powerCFA(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
Phi = Phi,
nullEffect = 'cor = 0',
nullWhich = c(1, 2),
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6))
)
summary(powerCFA)Determine sample size to detect that the correlations between factor 1 and 2 (of .3) as well as between 3 and 4 (of .1) differ from each other:
Phi <- matrix(c(
c(1, .3, .4, .5),
c(.3, 1, .2, .6),
c(.4, .2, 1, .1),
c(.5, .6, .1, 1)
), ncol = 4, byrow = TRUE)
powerCFA <- semPower.powerCFA(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
Phi = Phi,
nullEffect = 'corX = corZ',
nullWhich = list(c(1, 2), c(3, 4)),
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6))
)
summary(powerCFA)Determine sample size to detect that the correlations between factor 1 and 2 in group (of .3) differs from the one in group 2 (of .5):
Phi1 <- matrix(c(
c(1, .3, .4, .5),
c(.3, 1, .2, .6),
c(.4, .2, 1, .1),
c(.5, .6, .1, 1)
), ncol = 4, byrow = TRUE)
Phi2 <- matrix(c(
c(1, .5, .4, .5),
c(.5, 1, .2, .6),
c(.4, .2, 1, .1),
c(.5, .6, .1, 1)
), ncol = 4, byrow = TRUE)
powerCFA <- semPower.powerCFA(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80, N = list(1, 1),
# define hypothesis
Phi = list(Phi1, Phi2),
nullEffect = 'corA = corB',
nullWhich = c(1, 2),
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6))
)
summary(powerCFA)See the manual for more details.
Determine sample size to detect that the first slope (of .2) differs from zero:
corXX <- matrix(c(
c(1, .2, .6),
c(.2, 1, .1),
c(.6, .1, 1)
), ncol = 3, byrow = TRUE)
powerReg <- semPower.powerRegression(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
slopes = c(.2, .3, .4),
corXX = corXX,
nullEffect = 'slope = 0',
nullWhich = 1,
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6))
)
summary(powerReg)Determine sample size to detect that the first slope (of .2) differs from the third slope (of .4):
corXX <- matrix(c(
c(1, .2, .6),
c(.2, 1, .1),
c(.6, .1, 1)
), ncol = 3, byrow = TRUE)
powerReg <- semPower.powerRegression(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
slopes = c(.2, .3, .4),
corXX = corXX,
nullEffect = 'slopeX = slopeZ',
nullWhich = c(1, 3),
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6))
)
summary(powerReg)Determine sample size to detect that the first slope in group 1 (of .2) differs from the first slope in group 2 (of .4):
corXX <- matrix(c(
c(1, .2, .6),
c(.2, 1, .1),
c(.6, .1, 1)
), ncol = 3, byrow = TRUE)
powerReg <- semPower.powerRegression(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80, N = list(1, 1),
# define hypothesis
slopes = list(c(.2, .3, .4),
c(.4, .3, .2)),
corXX = corXX,
nullEffect = 'slopeA = slopeB',
nullWhich = 1,
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6))
)
summary(powerReg)See the manual for more details.
Determine sample size to detect an indirect effect of at least .12 (=
.3*.4) in a simple X -> M -> Y mediation based on an
observed variable only model:
powerMed <- semPower.powerMediation(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
bYX = .25,
bMX = .3,
bYM = .4,
nullEffect = 'ind = 0',
# define observed only
Lambda = diag(3)
)
summary(powerMed)Determine sample size to detect the indirect effect in group 1 (of
.12) differs from the indirect effect in group 2 (of .25) in a simple
X -> M -> Y mediation based on an observed variable
only model:
powerMed <- semPower.powerMediation(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80, N = list(1, 1),
# define hypothesis
bYX = list(.25, .25),
bMX = list(.3, .5),
bYM = list(.4, .5),
nullEffect = 'indA = indB',
# define observed only
Lambda = diag(3)
)
summary(powerMed)See the manual for more details.
Determine sample size to detect metric-noninvariance across two groups of magnitude as defined through the different loadings:
powerMI <- semPower.powerMI(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80, N = list(1, 1),
# define hypothesis
comparison = 'configural',
nullEffect = 'metric',
# define measurement model
loadings = list(
# group 1
list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6)),
# group 2
list(
c(.6, .5, .4),
c(.5, .8, .6),
c(.6, .5, .4),
c(.5, .8, .6))
)
)
summary(powerMI)Determine sample size to detect that the latent means differ across groups:
powerMI <- semPower.powerMI(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80, N = list(1, 1),
# define hypothesis
comparison = c('loadings', 'intercepts'),
nullEffect = c('loadings', 'intercepts', 'means'),
# define measurement model (same for all groups)
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6)),
# define indicator intercepts
tau = list(rep(0, 12), rep(0, 12)),
# define latent means
Alpha = list(
# group 1
rep(0, 4),
# group 2
c(0.5, 0, 0.5, 0)
)
)
summary(powerMI)See the manual for more details and further hypotheses.
Determine sample size to detect metric-noninvariance across four measurement occasions of magnitude as defined through the different loadings:
powerLI <- semPower.powerLI(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
comparison = 'configural',
nullEffect = 'metric',
# define measurement model
loadings = list(
c(.7, .6, .5), # time 1
c(.6, .6, .5), # time 2
c(.5, .5, .4), # time 3
c(.4, .5, .4) # time 4
),
autocorResiduals = TRUE
)
summary(powerLI)See the manual for more details and further hypotheses.
Determine sample size to detect that the (wave-constant) lag-2 effects differ from zero in a 4-wave autoregressive model involving wave-constant lag-1 effects:
powerAutoreg <- semPower.powerAutoreg(
# define type of power analysis
'a-priori', alpha = .05, power = .80,
# define hypothesis
nWaves = 4,
autoregEffects = c(.6, .6, .6),
lag2Effects = c(.2, .2),
waveEqual = c('autoreg', 'lag2'),
nullEffect = 'lag2=0',
# define measurement model
loadings = list(
c(.5, .6, .7),
c(.5, .6, .7),
c(.5, .6, .7),
c(.5, .6, .7)
),
invariance = TRUE,
autocorResiduals = TRUE
)
summary(powerAutoreg)Determine sample size to detect that the latent means differ across measurements in a 4 wave autoregressive model involving wave-constant lag-1 effects and wave-constant residual variances:
powerAutoreg <- semPower.powerAutoreg(
# define type of power analysis
'a-priori', alpha = .05, power = .80,
# define hypothesis
nWaves = 4,
autoregEffects = c(.6, .6, .6),
variances = c(1, 1, 1, 1),
means = c(0, .5, 1, .7),
waveEqual = c('autoreg', 'var'),
nullEffect = 'mean',
# define measurement model
loadings = list(
c(.5, .6, .7),
c(.5, .6, .7),
c(.5, .6, .7),
c(.5, .6, .7)
),
standardized = FALSE,
invariance = TRUE,
autocorResiduals = TRUE
)
summary(powerAutoreg)See the manual for more details and further hypotheses.
Determine sample size to detect a that the lag-1 autoregressive effects differ across waves in a 10-wave ARMA model with wave-stable variances and moving average parameters :
powerARMA <- semPower.powerARMA(
# define type of power analysis
'a-priori', alpha = .05, power = .80,
# define hypothesis
nWaves = 10,
autoregLag1 = c(.5, .7, .6, .5, .7, .6, .6, .5, .6),
mvAvgLag1 = rep(.3, 9),
variances = rep(1, 10),
waveEqual = c('var', 'mvAvg'),
nullEffect = 'autoreg',
# define measurement model
loadings = rep(list(c(.6, .5, .6)), 10),
invariance = TRUE,
autocorResiduals = TRUE
)
summary(powerARMA)Same as above, but detect that the moving average parameters differ across waves:
powerARMA <- semPower.powerARMA(
# define type of power analysis
'a-priori', alpha = .05, power = .80,
# define hypothesis
nWaves = 10,
autoregLag1 = rep(.5, 9),
mvAvgLag1 = c(.3, .4, .5, .3, .4, .5, .3, .4, .5),
variances = rep(1, 10),
waveEqual = c('var', 'autoreg'),
nullEffect = 'mvAvg',
# define measurement model
loadings = rep(list(c(.6, .5, .6)), 10),
invariance = TRUE,
autocorResiduals = TRUE
)
summary(powerARMA)Same as above, but include (wave-constant) lag-2 effects and detect that the lag-2 autoregressive parameters differ from zero:
powerARMA <- semPower.powerARMA(
# define type of power analysis
'a-priori', alpha = .05, power = .80,
# define hypothesis
nWaves = 10,
autoregLag1 = rep(.5, 9),
mvAvgLag1 = rep(.3, 9),
autoregLag2 = rep(.2, 8),
mvAvgLag2 = rep(.1, 8),
variances = rep(1, 10),
waveEqual = c('var', 'autoreg', 'mvAvg', 'autoregLag2', 'mvAvgLag2'),
nullEffect = 'autoregLag2 = 0',
# define measurement model
loadings = rep(list(c(.6, .5, .6)), 10),
invariance = TRUE,
autocorResiduals = TRUE
)
summary(powerARMA)Same as above, but detect that residual variances differ across waves:
powerARMA <- semPower.powerARMA(
# define type of power analysis
'a-priori', alpha = .05, power = .80,
# define hypothesis
nWaves = 10,
autoregLag1 = rep(.5, 9),
mvAvgLag1 = rep(.3, 9),
variances = c(1, .8, .7, .6, .8, .7, .6, .8, .7, .6),
waveEqual = c('mvAvg', 'autoreg'),
nullEffect = 'var',
# define measurement model
loadings = rep(list(c(.6, .5, .6)), 10),
invariance = TRUE,
autocorResiduals = TRUE
)
summary(powerARMA)See the manual for more details and further hypotheses.
Determine sample size to detect a cross-lagged effect of X on Y of at least .10 in a two-wave CLPM:
powerCLPM <- semPower.powerCLPM(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
nullEffect = 'crossedX = 0',
nWaves = 2,
autoregEffects = c(.60, .70),
crossedEffects = c(.10, .15),
rXY = c(.3, .1),
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6))
)
summary(powerCLPM)Same as above, but in a random-intercept CLPM involving 3 waves with observed variables only:
powerRICLPM <- semPower.powerRICLPM(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
nullEffect = 'crossedX = 0',
nWaves = 3,
autoregEffects = c(.60, .70),
crossedEffects = c(.10, .15),
rXY = c(.3, .1, .1),
waveEqual = c('autoregX', 'autoregY', 'crossedX', 'crossedY'),
# define measurement model
Lambda = diag(6)
)
summary(powerRICLPM)
Determine sample size to detect the cross-lagged effect of X on Y differs from the one of Y on X a two-wave CLPM:
powerCLPM <- semPower.powerCLPM(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
nullEffect = 'crossedX = crossedY',
nWaves = 2,
autoregEffects = c(.60, .70),
crossedEffects = c(.10, .15),
rXY = c(.3, .1),
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6))
)
summary(powerCLPM)Determine sample size to detect the cross-lagged effect of X on Y in group 1 (of .10) differs from the one in group 2 (of .2):
powerCLPM <- semPower.powerCLPM(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80, N =list(1, 1),
# define hypothesis
nullEffect = 'crossedXA = crossedXB',
nWaves = 2,
autoregEffects = c(.60, .70),
crossedEffects = list(
# group 1
list(.10, .15),
# group 2
list(.20, .15)
),
rXY = c(.3, .1),
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6))
)
summary(powerCLPM)See the manual for more details and for additional types of hypothesis.
Determine sample size to detect a that the mean of the slope factor differs from zero in a 3-wave LGCM:
powerLGCM <- semPower.powerLGCM(
# define type of power analysis
'a-priori', alpha = .05, power = .80,
# define hypothesis
nWaves = 3,
means = c(.5, .2), # i, s
variances = c(1, .5), # i, s
covariances = .25,
nullEffect = 'sMean = 0',
# define measurement model
loadings = list(
c(.6, .7, .5),
c(.6, .7, .5),
c(.6, .7, .5)
),
autocorResiduals = TRUE
)
summary(powerLGCM)Same as above, but detect that the variance of the intercept factor differs from zero:
powerLGCM <- semPower.powerLGCM(
# define type of power analysis
'a-priori', alpha = .05, power = .80,
# define hypothesis
nWaves = 3,
means = c(.5, .2), # i, s
variances = c(1, .5), # i, s
covariances = .25,
nullEffect = 'iVar = 0',
# define measurement model
loadings = list(
c(.6, .7, .5),
c(.6, .7, .5),
c(.6, .7, .5)
),
autocorResiduals = TRUE
)
summary(powerLGCM)Detect that the variance of a quadratic slope factor in a 4-wave LGCM differs from zero:
powerLGCM <- semPower.powerLGCM(
# define type of power analysis
'a-priori', alpha = .05, power = .80,
# define hypothesis
nWaves = 4,
quadratic = TRUE,
means = c(.5, .2, .1), # i, s, s2
covariances = matrix(c(
# i, s, s2
c(1, .2, .1),
c(.2, .2, .05),
c(.1, .05, .1)
), ncol = 3, byrow = TRUE),
nullEffect = 's2Var = 0',
# define measurement model
loadings = list(
c(.6, .7, .5),
c(.6, .7, .5),
c(.6, .7, .5),
c(.6, .7, .5)
),
autocorResiduals = TRUE
)
summary(powerLGCM)Detect that the intercept-slope covariance differs across groups in a two-group 3-wave LGCM:
powerLGCM <- semPower.powerLGCM(
# define type of power analysis
'a-priori', alpha = .05, power = .80, N = list(1, 1),
# define hypothesis
nWaves = 3,
means = c(.5, .2),
variances = c(1, .5),
covariances = list(
c(.25), # group 1
c(.1)), # group 2
nullEffect = 'isCovA = isCovB',
groupEqual = c('ivar', 'svar'),
# define measurement model
loadings = list(
c(.6, .7, .5),
c(.6, .7, .5),
c(.6, .7, .5)
),
autocorResiduals = TRUE
)
summary(powerLGCM)See the manual for more details and further hypotheses.
Perform a simulated power-analysis with 500 replications and non-normal data with a population multivariate skewness of 10 and multivariate kurtosis of 200 to determine the sample size to detect that a correlation between the first and the second factor of at least .3 differs from zero:
Phi <- matrix(c(
c(1, .3, .4, .5),
c(.3, 1, .2, .6),
c(.4, .2, 1, .1),
c(.5, .6, .1, 1)
), ncol = 4, byrow = TRUE)
set.seed(1234)
powerCFA <- semPower.powerCFA(
# define type of power analysis
type = 'a-priori', alpha = .05, power = .80,
# define hypothesis
Phi = Phi,
nullEffect = 'cor = 0',
nullWhich = c(1, 2),
# define measurement model
loadings = list(
c(.7, .6, .5),
c(.5, .8, .6),
c(.7, .6, .5),
c(.5, .8, .6)),
# request simulated power analysis
simulatedPower = TRUE,
simOptions = list(
nReplications = 500,
type = 'mnonr',
skewness = 10,
kurtosis = 200
))
summary(powerCFA)See the manual for more details.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.