The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.
A project to assist in the management of API_KEYS to pull REDCap data using secure practices. The interface will work with anything pulling data into a variable that needs an API_KEY kept secure.
An API_KEY is your username and password rolled into one. This long hexadecimal string provides access into REDCap repositories. If these repositories contain PHI, HIPAA has a $100 per patient record minimum fine. This means the inadvertent leakage of a REDCap API_KEY can be very expensive and result in legal exposure.
The risk of exposure is very high if one simply hard codes the API_KEY into a report. If one is sharing with colleagues, git is commonly used to version code. The moment such code is pushed to a public repository such as github.com, that API_KEY is now shared with the world, and by proxy potentially all that clinical data.
Even storing the API_KEY(s) in a local file in the project is bad for similar reasons. It’s quite easy for git to pick up that file and begin versioning it.
Storing in plain text outside the project directory is better, but the problem that the API_KEY is still present in plain text is the equivalent of storing all that clinical data on the drive in plain text.
This package rccola,
RedCap
CrytpO Locker for
Api_keys. provides a simple solution to this problem.
It keeps the API_KEY(s) in memory in an R session when working.
IMPORTANT: Make sure R is set to never save the .RData of the
session or one is back to yet another plain text password save on the
local drive. See
r-bloggers and stackoverflow.
The API_KEY(s) are stored in an encrypted keyring when not working. The
system will prompt for a keyring password initially and the keys. Then
it will and save and retrieve as needed later in ones workflow. It is
also designed to work with a production report server by allowing a
production configuration to override usage of a cryptolocker. Thus the
path from a statistician developing a report to a production server
requires no code changes.
devtools::install_github("r-lib/keyring")
devtools::install_github("spgarbet/rccola")The latest version of keyring supports rccola password operations inside knitr.
For the purposes of demonstration, we shall assume that there are two REDCap projects that need to be summarized in a report:
For local knitting from RStudio if one wishes to use parameters, the header of the file would look like this:
---
title: "A Wonderful Report"
author: "Yours Truly"
date: "Today"
output:
html_document: default
pdf_document: default
params:
intake:
label: Enter your RedCap API Token for Intake
value: '' # NEVER EVER PUT AN API_KEY IN THIS FILE!
input: password
details:
label: Enter your RedCap API Token for Details
value: '' # NEVER EVER PUT AN API_KEY IN THIS FILE!
input: password
---
```{r setup, include=FALSE}
knitr::opts_chunk$set(echo = FALSE, warning=FALSE, message=FALSE)
library(rccola)
drinkREDCap(c("intake", "details"), keyring="myreportname")
...The document can now be knitted with
Knit -> Knit with Parameters. It also works when running
chunks from the console. Two variables are now sitting in memory
intake and details with the contents of those
two RedCap repositories.
Using a keyring removes the need to knit with parameters and entering the API_KEY with each new session, and the keys are stored in local encrypted storage. Only the user specified password to the cryptolocker keyring is needed once the keyring is created to load the API_KEYs. This is a secure and convenient method and the recommended usage.
See the keyring github page for details on configuring your keyring storage to use a preferred service if you desire. It will default to a password protected encrypted user file.
The "service" used for all keyrings is
"rccola". The keyring created by this package will be
whatever string you pass as the keyring=. Thus API_KEYs
could be shared between reports as well via using the same keyring.
However, since they are keyed via their variable names–if one used a
single keyring for all each RedCap database would need a distinct
variable name that would be consistent across projects. Otherwise, there
could be a namespace collision and it could load the wrong database into
a variable. Be very careful with naming when using a shared keyring
between projects.
If you wish to delete the keys stored in the keyring, simply:
keyring::keyring_delete("your_keyring_name"). The password
to a keyring is established the first time it’s created. If you don’t
remember or there was a mistake this is the method to reset the keyring
and start over.
To delete a single key from a keyring the command is:
keyring::key_delete('rccola', 'your_variable_name', 'your_keyring_name')
Some versions of MacOS insist on a password with each round trip to the crypto locker. If prompted over and over for a password, one can override using the MacOS provided crypto locker and use a local file based one without this issue.
An Rmarkdown header would look something like this to override using the system keyring with this issue.
```{r setup, include=FALSE}
knitr::opts_chunk$set(echo = TRUE)
library(rccola)
options(keyring_backend="file")
```One can load forms from a database. Continuing the above example
let’s imagine that the intake project has two forms:
consent and randomization.
drinkREDCap(variables = c("intake", "details"),
keyring = "myreportname",
forms=list("intake" = c("consent", "randomization")))
The resulting variables in memory are, which were pulled from the intake API_KEY and the details API_KEY.
redcapAPI::exportRecord is only the default, anything that needs key
management and returns a variable is supported by this library. A
function supplied to the FUN= argument can be of either of
these two signatures: function(key, ...) or
function(key, forms, ...) if the forms argument is
used.
Let’s say we have the above examples and wish to use a curl method.
library(RCurl)
rcurl_load <- function(key, forms, ...)
{
data <- postForm(
'https://redcap.vanderbilt.edu/api/',
token=key,
content='record',
format='csv',
forms=forms,
fields=c("record_id"),
rawOrLabel='label',
exportDataAccessGroups = TRUE
)
read.csv(file = textConnection(data),
header = TRUE,
sep = ",",
na.strings = c(".","","NA","na"),
stringsAsFactors = FALSE)
}
drinkREDCap(c("intake", "details"),
keyring="myreportname",
forms=list(
"intake" = c("consent", "randomization")
)
FUN=rcurl_load)This calls the user defined function rcurl_load and places in user
space three variables: intake.consent,
intake.randomization, and details.
For automated processes the API_KEYS in a file are generally
required. These automated servers are usually security hardened with
very tightly controlled access. To facilitate the smooth transition to a
production environment, the config option can be used to
specify a configuration file with the keys. If config is
set to ‘auto’, the default, then it takes the name of the current
directory and looks above it for a file of the same name with a “.yml”
extension as the config file. If config is set to NULL this
override behavior is not followed. If the config file does not exist it
prompts the user as usual.
An example yaml configuration file would look something like the following:
other-config-stuff1: blah blah
rccola:
args:
url: https://redcap.vanderbilt.edu/api/
keys:
intake: THIS_IS_THE_INTAKE_DATABASE_APIKEY
details: THIS_IS_THE_DETAILS_DATABASE_APIKEY
other-config-stuff2: blah blah
other-config-stuff3: blah blah
...If one doesn’t wish for the specified function to be assigned back as
a variable in the environment, then the assign=FALSE
argument can be used. This allows for more complex interactions, such as
writing back to a RedCap database.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.