The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.
Overview
Background
Real Twig was designed and tested using QSMs created with the TreeQSM modeling
software. If high quality point clouds, QSMs with the proper input
settings, and species specific twig diameter measurements are supplied,
you can expect to get very good estimates of tree volume within ± 10% of
the real tree volume.
If any given QSM provides parent-child cylinder relationships, Real
Twig will work, as is the case of the SimpleForest, Treegraph,
and aRchi software
packages. If high quality point clouds, QSMs with the proper input
settings, and species specific twig diameter measurements are supplied,
you can expect to get good estimates of tree volume across multiple
different software packages.
While Real Twig can provide excellent tree volume estimates, it can
not transform poor quality data into good data. As a general rule of
thumb, the closer the QSM resembles the actual tree before correction,
the better the results will be after correction. Real Twig performs best
when the topology of the tree is correct, and only the cylinder sizes
are the main sources of QSM error. Errors in QSM topology become readily
apparent after correction, so Real Twig can also be used to visually
validate QSM topology without reference data.
Installation
You can install the package directly from CRAN:
install.packages("rTwig")
Or the latest development version from GitHub:
devtools::install_github("https://github.com/aidanmorales/rTwig")
Load Packages
The first step is to load the rTwig package. Real Twig works well
when paired with packages from the Tidyverse, so we will also load
the dplyr package to help with data manipulation.
# Load rTwig
library(rTwig)
# Other useful packages
library(dplyr)
Import QSM
rTwig supports all available versions of TreeQSM, from v2.0
to v2.4.1 at the time of writing. It is important to note that
legacy versions of TreeQSM (v2.0) store data in a much
different format than modern versions (v2.3.0-2.4.1). It is
strongly advised to use the latest version of TreeQSM with rTwig for the
best QSM topology and volume estimates. Older versions can be used, but
the QSM topology is poor, and volume underestimation is almost
guaranteed.
Regardless of the version of TreeQSM or MATLAB used, the
import_qsm() function will import a QSM (.mat extension)
and convert the data to a format usable by R. The user must specify
which version of TreeQSM they are using with the version
parameter. rTwig automatically defaults to use the new TreeQSM format,
so the older format can be imported with version = "2.0".
import_qsm() also imports all QSM information, including
cylinder, branch, treedata, rundata, pmdistance, and triangulation data,
which are stored together as a list.
SimpleForest exports its QSMs as .csv files, so they are easy to load
into R using the built in read.csv() function. If the QSM
contains thousands of cylinders, it is much faster to use the
fread() function from the data.table package
to take advantage of multi-threaded support.
Treegraph exports its QSMs as .json files. To import them into R, we
can use the import_treegraph() function to quickly load in
a Treegraph QSM.
aRchi is built in R, so there is no provided function to import the
data. Users can extract the aRchi cylinder data with
aRchi::get_QSM() before running the rTwig functions.
Example 1: TreeQSM v2.3.0 - 2.4.1
We can import a QSM by supplying the import_qsm()
function the directory to our QSM.
# QSM directory
file <- system.file("extdata/QSM.mat", package = "rTwig")
# Import and save QSM
qsm <- import_qsm(file)
The QSM should be a list with six elements. We can check it as
follows:
summary(qsm)
#> Length Class Mode
#> cylinder 17 data.frame list
#> branch 10 data.frame list
#> treedata 91 -none- list
#> rundata 45 data.frame list
#> pmdistance 21 -none- list
#> triangulation 12 -none- list
Let’s check what version of TreeQSM was used, the date the QSM was
made, and take a look at the cylinder data.
# QSM info
qsm$rundata$version
#> [1] "2.4.1"
qsm$rundata$start.date
#> [1] "2023-12-06 10:14:31 EST"
# Number of cylinders
str(qsm$cylinder)
#> 'data.frame': 1136 obs. of 17 variables:
#> $ radius : num 0.0465 0.0454 0.0442 0.0437 0.0429 ...
#> $ length : num 0.09392 0.07216 0.06654 0.00938 0.06795 ...
#> $ start.x : num 0.768 0.768 0.768 0.769 0.769 ...
#> $ start.y : num -16.4 -16.4 -16.4 -16.3 -16.3 ...
#> $ start.z : num 254 254 254 254 254 ...
#> $ axis.x : num 0.00995 -0.0111 0.01364 0.01571 0.01449 ...
#> $ axis.y : num 0.0912 0.0391 0.0367 0.0271 0.0267 ...
#> $ axis.z : num 0.996 0.999 0.999 1 1 ...
#> $ parent : int 0 1 2 3 4 5 6 7 8 9 ...
#> $ extension : int 2 3 4 5 6 7 8 9 10 11 ...
#> $ added : num 0 0 0 0 0 0 0 0 0 0 ...
#> $ UnmodRadius : num 0.0465 0.0454 0.0442 0.0437 0.0429 ...
#> $ branch : int 1 1 1 1 1 1 1 1 1 1 ...
#> $ SurfCov : num 0.875 1 1 1 1 1 1 1 1 1 ...
#> $ mad : num 0.00072 0.000538 0.000523 0.000335 0.000438 ...
#> $ BranchOrder : int 0 0 0 0 0 0 0 0 0 0 ...
#> $ PositionInBranch: int 1 2 3 4 5 6 7 8 9 10 ...
Example 2: TreeQSM v2.0
Let’s try importing an old QSM and check its structure.
# QSM Directory
file <- system.file("extdata/QSM_2.mat", package = "rTwig")
# Import and save QSM
qsm2 <- import_qsm(file, version = "2.0")
# QSM Info
summary(qsm2)
#> Length Class Mode
#> cylinder 15 data.frame list
#> treedata 33 -none- list
str(qsm2$cylinder)
#> 'data.frame': 1026 obs. of 15 variables:
#> $ radius : num 0.0612 0.056 0.0553 0.0552 0.0534 ...
#> $ length : num 0.335 0.283 0.272 0.244 0.267 ...
#> $ start.x : num 8.4 8.43 8.44 8.47 8.5 ...
#> $ start.y : num 47.7 47.7 47.7 47.8 47.8 ...
#> $ start.z : num 2.23 2.57 2.85 3.12 3.36 ...
#> $ axis.x : num 0.1103 0.0531 0.0878 0.1666 0.0894 ...
#> $ axis.y : num 0.0337 0.0296 0.1282 0.0801 0.061 ...
#> $ axis.z : num 0.993 0.998 0.988 0.983 0.994 ...
#> $ parent : num 0 1 2 3 4 5 6 7 8 9 ...
#> $ extension : num 1 2 3 4 5 6 7 8 9 10 ...
#> $ added : int 0 0 0 0 0 0 0 0 0 0 ...
#> $ UnmodRadius : num 0.0612 0.056 0.0553 0.0552 0.0534 ...
#> $ branch : num 1 1 1 1 1 1 1 1 1 1 ...
#> $ BranchOrder : num 0 0 0 0 0 0 0 0 0 0 ...
#> $ PositionInBranch: num 1 2 3 4 5 6 7 8 9 10 ...
Example 3: SimpleForest
# QSM directory
file <- system.file("extdata/QSM.csv", package = "rTwig")
# Import and save QSM cylinder data
cylinder <- read.csv(file)
Let’s take a look at the SimpleForest cylinder data.
str(cylinder)
#> 'data.frame': 1149 obs. of 17 variables:
#> $ ID : int 0 1 2 3 4 5 6 7 8 9 ...
#> $ parentID : int -1 0 1 2 3 4 5 6 7 8 ...
#> $ startX : num 0.761 0.759 0.771 0.768 0.765 ...
#> $ startY : num -16.4 -16.4 -16.4 -16.3 -16.4 ...
#> $ startZ : num 254 254 254 254 254 ...
#> $ endX : num 0.759 0.771 0.768 0.765 0.769 ...
#> $ endY : num -16.4 -16.4 -16.3 -16.4 -16.4 ...
#> $ endZ : num 254 254 254 254 254 ...
#> $ radius : num 0.0472 0.0479 0.0469 0.0467 0.0453 ...
#> $ length : num 0.0497 0.0529 0.0535 0.0525 0.0528 ...
#> $ growthLength : num 31.4 31.4 31.3 31.3 31.2 ...
#> $ averagePointDistance: num 0.00589 0.00378 0.00205 0.00246 0.00251 ...
#> $ segmentID : int 0 0 0 0 0 0 0 0 0 0 ...
#> $ parentSegmentID : int -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 ...
#> $ branchOrder : int 0 0 0 0 0 0 0 0 0 0 ...
#> $ reverseBranchOrder : int 18 18 18 18 18 18 18 18 18 18 ...
#> $ branchID : int 0 0 0 0 0 0 0 0 0 0 ...
Cylinder Data
Next, we have to update the parent-child ordering in the cylinder
data to allow for path analysis and add some new QSM variables. The most
important QSM variable is growth length. Growth length is a cumulative
length metric, where the growth length of a cylinder is its length, plus
the lengths of all of its children. This gives us perfect ordering along
a branch or a path, where the highest growth length is equal to the base
of the tree, and twigs have a growth length equal to their cylinder
length. It is also important to note that the number of twigs in a QSM
is always equal to the number of paths in a QSM, since a path goes from
the base of the tree to a twig tip.
We also calculate several additional variables to improve QSM
analysis and visualization. The reverse branch order (RBO) assigns an
order of 1 to the twigs, and works backwards to the base of the main
stem, which has the highest RBO. The RBO is essentially the maximum node
depth for any given branch segment (the area between branching forks).
RBO problematic twig cylinders easy to identify. The distance from each
cylinder to the base, and the average distance from each cylinder to all
supported twigs are new ways to help visualize problematic
cylinders.
Let’s save the cylinders to a new variable to make it easier to work
with and update the ordering.
# Save cylinders to new object
cylinder <- qsm$cylinder
# Update cylinder data
cylinder <- update_cylinders(cylinder)
Topology
Before we correct the QSM, it is often worthwhile to check the
quality of the QSM by plotting it against its input point cloud. To do
this, we load the point cloud and save it as a data frame, with the
first three columns as the x, y, and z columns. We use the
plot_qsm() function to do this. We want to check the raw
cylinder fits before any possible modification, so we will will use the
raw cylinder radii.
# Load the input point cloud
file <- system.file("extdata/cloud.txt", package = "rTwig")
cloud <- read.table(file, header = FALSE)
# Plot the qsm and point cloud
plot_qsm(cylinder = cylinder, cloud = cloud, radius = "UnmodRadius")
Twig Diameters
Before we can correct the QSM radii, we need to know what our real
twig diameter is. For this example tree, the species is a Kentucky
coffee tree (Gymnocladus dioicus), which has nice, stout twigs.
rTwig comes with a data base of twigs that can be called by typing in
the twigs data set. The data set includes the average twig
radius, the min and max radius, the standard deviation, and the
coefficient of variation. Let’s look at the twig data set and find the
twig diameter for Kentucky coffee tree.
# Look at the twigs database
twigs
#> # A tibble: 104 × 7
#> scientific_name radius_mm n min max std cv
#> <chr> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl>
#> 1 Abies concolor 1.43 21 0.89 1.9 0.28 0.19
#> 2 Abies spp. 1.43 21 0.89 1.9 0.28 0.19
#> 3 Acer platanoides 1.39 30 0.89 2.03 0.3 0.21
#> 4 Acer rubrum 1.18 30 0.89 1.52 0.16 0.14
#> 5 Acer saccharinum 1.41 14 0.89 1.9 0.27 0.2
#> 6 Acer saccharum 1.2 30 0.89 1.65 0.23 0.19
#> 7 Acer spp. 1.29 104 0.89 2.03 0.23 0.18
#> 8 Aesculus flava 2.96 14 2.29 4.44 0.58 0.19
#> 9 Aesculus spp. 2.96 14 2.29 4.44 0.58 0.19
#> 10 Betula nigra 0.85 30 0.51 1.52 0.23 0.27
#> # ℹ 94 more rows
# Find our species
filter(twigs, scientific_name == "Gymnocladus dioicus")
#> # A tibble: 1 × 7
#> scientific_name radius_mm n min max std cv
#> <chr> <dbl> <dbl> <dbl> <dbl> <dbl> <dbl>
#> 1 Gymnocladus dioicus 4.23 30 2.79 6.6 0.87 0.2
Summary Metrics
Before we correct the QSM, Let’s take a look at the current metrics,
so we can compare the tree volume before and after correction. We can do
this with the qsm_summary() function. If stem triangulation
was enabled in TreeQSM, we can use it to better represent the main stem
volume in some cases, especially when there are large buttress flares.
We can also make a plot of the radius versus the growth length to see
how much overestimation there is in the twig radii.
# QSM summary
qsm_summary(cylinder = cylinder, radius = radius)[[1]]
#> # A tidytable: 6 × 3
#> branch_order tree_volume_L tree_area_m2
#> <int> <dbl> <dbl>
#> 1 0 10.8 0.644
#> 2 1 5.80 0.827
#> 3 2 3.86 0.732
#> 4 3 1.06 0.237
#> 5 4 0.622 0.0785
#> 6 5 0.0346 0.00693
# QSM summary with Triangulation
qsm_summary(cylinder = cylinder, radius = radius, triangulation = qsm$triangulation)[[1]]
#> # A tidytable: 6 × 3
#> branch_order tree_volume_L tree_area_m2
#> <int> <dbl> <dbl>
#> 1 0 28.7 0.632
#> 2 1 5.80 0.827
#> 3 2 3.86 0.732
#> 4 3 1.06 0.237
#> 5 4 0.622 0.0785
#> 6 5 0.0346 0.00693
Looking at the diagnostic plot on a log log scale, with the measured
twig radius as the horizontal line, we can see that nearly all of the
twig radii are overestimated, with increasing radii variation as the
growth length approaches zero. Except for the main stem, there is not a
very clear pattern in the individual branch tapering.
Correct Radii
Now we can correct our QSM cylinder radii with the
correct_radii() function. In this step, we model each path
in the tree separately, where poorly fit cylinders are identified and
removed, and a GAM is fit, where the intercept is the measured twig
radius, and the growth length predicts the cylinder radius. Let’s
correct the cylinder radii on our Kentucky coffee tree and look at the
new volume estimates and diagnostic plots.
# Correct cylinder radii
cylinder <- correct_radii(cylinder, twig_radius = 4.23)
# Corrected QSM summary
qsm_summary(cylinder, radius = radius)[[1]]
#> # A tidytable: 6 × 3
#> branch_order tree_volume_L tree_area_m2
#> <int> <dbl> <dbl>
#> 1 0 10.8 0.640
#> 2 1 5.20 0.754
#> 3 2 2.69 0.583
#> 4 3 0.539 0.170
#> 5 4 0.104 0.0431
#> 6 5 0.00683 0.00308
Here we can see that we reduced the volume of the QSM by around 3
liters, which is around a 15% overestimation in volume before
correction. Kentucky coffee tree has relatively large twigs, so the
overestimation is not as severe as a tree with much smaller twigs, that
can have upwards of >200% overestimation in some cases.
Looking at the diagnostic plot, we can see that individual branches
can clearly be identified by their unique allometry. Notice how nearly
all of the volume reduction occurred in the higher order branches, with
the main stem remaining nearly unchanged. The branches now taper towards
the measured twig radius for Kentucky coffee tree. Getting the real twig
diameter is critical, as too high a value will overestimate volume, and
too low a value will underestimate total volume, with the over or
underestimate being proportional to the number of twigs and small
branches in the tree. If your species is not available in the database,
we have found that the genus level twig radius average is a good
substitute.
Visualization
Optionally, we can smooth our QSM by ensuring all of the cylinders
are connected. This is a visual change and does not affect the volume
estimates. We can do this with the smooth_qsm() function,
and plot the results with the plot_qsm() function. The
different colors are the different branch orders. We can also color our
QSM by many different variables and palettes. See the
plot_qsm() documentation for more details.
# Smooth QSM
cylinder <- smooth_qsm(cylinder)
# Plot QSM
plot_qsm(cylinder)
# QSM Custom Colors & Piping
cylinder %>%
plot_qsm(
radius = "radius",
cyl_color = "reverseBranchOrder",
cyl_palette = "magma"
)
# Plot Twigs Colored by Unique Segment
cylinder %>%
filter(reverseBranchOrder == 1) %>%
plot_qsm(
radius = "radius",
cyl_color = "reverseBranchOrder",
cyl_palette = "rainbow"
)
We can also save our QSM as a mesh (.ply extension) for use in other
modeling programs with the export_mesh() function. The same
colors and palettes found in the plot_qsm() function can be
used to color the mesh.
# Export Mesh Colored by RBO
cylinder %>%
export_mesh(
filename = "QSM_mesh",
radius = "radius",
color = "reverseBranchOrder",
palette = "magma"
)
# Export Twigs Colored by Unique Segments
cylinder %>%
filter(reverseBranchOrder == 1) %>%
export_mesh(
filename = "QSM_mesh",
radius = "radius",
color = "reverseBranchOrder",
palette = "rainbow"
)
Workflow & Best Practices
Below is an overview of the typical rTwig processing chain. When
dealing with multiple trees, we advise creating a master data frame in a
tidy format, where each unique tree is a row, and the columns are the
tree id, the directory to the QSM .mat file, and the species twig
diameter, all of which can be tailored to your workflow needs. Then it
is a simple matter of looping over the master data frame, correcting
each tree, and saving the results to a master list. Make sure to read
each function’s documentation for more examples and unique features.
# Import QSM
file <- system.file("extdata/QSM.mat", package = "rTwig")
# Real Twig Main Steps
cylinder <- run_rtwig(file, twig_radius = 4.23)
# Tree Metrics
metrics <- tree_metrics(cylinder)
# Plot Results
plot_qsm(cylinder)
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.