The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.

Visualising the output of Monte Carlo methods with ggsmc

The ggsmc package uses ggplot2 to display the results of importance sampling (IS), sequential Monte Carlo (SMC) or ensemble-based algorithms. Each algorithm outputs a collection of points, usually evolved through a sequence of target distributions, which for IS and SMC are weighted.

Data format

To use this package the algorithm output must be in tidy format, where each dimension of each parameter for each particle lies in a distinct row in a data frame. The data sir_cwna_model provides an example of valid input to the plotting functions.

library(ggsmc)
data(sir_cwna_model)
head(sir_cwna_model)
#>   ExternalIndex Target      Time NormalisingConstant   ISESS TargetParameters
#> 1             1      1 0.0025475            -3.07181 16.2299        i=0;dt=1;
#> 2             1      1 0.0025475            -3.07181 16.2299        i=0;dt=1;
#> 3             1      1 0.0025475            -3.07181 16.2299        i=0;dt=1;
#> 4             1      1 0.0025475            -3.07181 16.2299        i=0;dt=1;
#> 5             1      1 0.0025475            -3.07181 16.2299        i=0;dt=1;
#> 6             1      1 0.0025475            -3.07181 16.2299        i=0;dt=1;
#>   Iteration Particle AncestorIndex  LogWeight ParameterName Dimension    Value
#> 1         1        1             1 -28.057199             x         1   6.5297
#> 2         1        1             1 -28.057199             x         2 -15.4264
#> 3         1        2             2  -2.453099             x         1  -0.5869
#> 4         1        2             2  -2.453099             x         2  -8.7790
#> 5         1        3             3 -11.568199             x         1   3.6434
#> 6         1        3             3 -11.568199             x         2 -14.1641

This data contains the output of a particle filter (PF) applied to a target tracking problem. The state \(x=(x_1,x_2)^T\) tracked using the PF is two-dimensional, consisting of the (one-dimensional) position and velocity of the target. The value of the first particle for the first target distribution is given by \((x_1,x_2)^T=(3.0163,4.6682)^T\). In tidy format, this is stored on two rows of the data frame, where the Dimension column gives the index of the state ParameterName: e.g. in the row where ParameterName=="x" and Dimension==2, the Value column gives the value of \(x_2\).

If you are unfamiliar with it, this way of storing data with its many repeated values might seem wasteful. Its strength is that this format can be used consistently across different situations, allowing the use of general purpose packages for processing and, in our case, plotting the data. If your data is in the more standard matrix format for Monte Carlo output (i.e. one parameter vector per row), then you can use the matrix2tidy function included in the package to convert to the required format your algorithm output for each target distribution. For this function you need to supply your algorithm output in matrix format, a name for the parameter that is represented in the output, an integer index for the target to which the output corresponds and the log_weights of each particle if using an IS or SMC algorithm. If using an algorithm that iterates over multiple targets, the matrix2tidy function should be called for each target, then the output of each call stacked together using rbind.

The sir_cwna_model data contains more columns than are required to use the plotting functions in this package. The columns required by all functions are:

For the output of an IS or SMC algorithm, we may additionally include a LogWeight column to store the log of the (normalised) weight of the particle. If this column is not found in the data, each particle will be assigned an equal weight.

Histograms and densities

The plot_histogram and plot_density functions may be used to plot, respectively, a histogram or density of the marginal distribution of one dimension of one parameter. If the LogWeight column is present in the data a weighted histogram/density will be used.

For these functions, a parameter (string) and dimension (integer) argument need to be used. If the target variable is set, the function will plot the marginal histogram/density for the specified target, parameter and dimension. If no target is specified, the points for all points for the specified parameter and dimension will be used for the plot. The plot_histogram function also takes a bins argument, which may be used to specify the number of bins for the histogram (if this argument is not specified, the default value in ggplot2 is used).

For an example, we look at the 20th target of the sir_cwna_model data using both a histogram and a density.

plot_histogram(sir_cwna_model,
               parameter = "x",
               dimension = 1,
               target = 20,
               bins = 20)

plot_density(sir_cwna_model,
             parameter = "x",
             dimension = 1,
             target = 20)

Scatter plots

The plot_scatter function can we used to creates a scatter plot of the Monte Carlo representation of the joint distribution between two parameters, or two dimensions of the same parameter. We specify the parameter and dimension for the x-axis using the arguments x_parameter and x_dimension respectively. The target variable plays the same role as for plot_histogram and plot_density. If a LogWeight column is present in the data, the size of the points in the scatter plot will be used to represent the particle weights.

We illustrate this plot again on the 20th target of the sir_cwna_model data.

plot_scatter(sir_cwna_model,
             x_parameter = "x",
             x_dimension = 1,
             y_parameter = "x",
             y_dimension = 2,
             target = 20,
             alpha = 0.5,
             max_size = 3)

Note that in this plot we have used two additional arguments, alpha and max_size, to adjust the look of the plot. In this example we have very few importance points, I found the default value of alpha = 0.1 (the transparency of the points from 0 to 1) to be too low, and the default max_size = 1 (governing the size of the points) to be too small.

Genealogies

To more clearly understand the output of an SMC or ensemble-based algorithm it can be useful to visualise the evolution of the particles over time. The function plot_genealogy may be used for this purpose, for one dimension of one parameter. We again use the sir_cwna_model data to illustrate this function, showing the evolution of the PF’s estimate of the target position over time.

plot_genealogy(sir_cwna_model,
               parameter = "x",
               dimension = 1,
               use_initial_points = FALSE,
               vertical = FALSE,
               alpha_lines = 0,
               alpha_points = 0.05,
               arrows = FALSE)

The first few arguments are the same as those used for the plot_density function. We have used several additional arguments the alter the plot:

To illustrate an alternative configuration of a genealogy plot, we use output from a different algorithm: an SMC sampler applied to a sequence of targets on parameter \(\theta\) that begins with a Gaussian distribution, and ends with a two-component mixture of Gaussians.

data(mixture_25_particles)
plot_genealogy(mixture_25_particles,
               parameter = "θ",
               dimension = 1,
               alpha_lines = 0.2,
               alpha_points = 0.4)

For an SMC algorithm, due to the resampling step the index of the ancestor of particle \(i\) for each target is not likely to be \(i\). To produce a plot with lines that connect each particle with its ancestor, we need an additional column in the data named AncestorIndex.

Time series

For some algorithms each Monte Carlo point represents a time series, where the index that thus far has been represented by the column Dimension can be thought of as indexing time. To illustrate this we plot simulations from a stochastic Lotka-Volterra model produced during a run of an approximate Bayesian computation (ABC) algorithm. These are contained in the data lv_output.

data(lv_output)
plot_time_series(lv_output,
                 parameters = c("X","Y"),
                 alpha = 0.5,
                 ylimits=c(0,600))

In this plot the weight (given by LogWeight) of each time series is represented by the width the line. We make the lines more visible by choosing alpha = 0.5 compared to the default 0.1, and change the limits of the y-axis by using ylimits=c(0,1000). There is only one target, so the target argument does not need to be specified. The max_line_width argument (not used here) can be used to scale the width of all lines in the plot.

Modifying figures

All figures are created using ggplot2, so can be modified using other functions from this package. We now demonstrate this by adding the true target position onto a plot of the sir_cwna_model data, and changing its style. We also demonstrate the ability to automatically generate a title for the figure.

data(cwna_data)
plot_genealogy(sir_cwna_model,
               parameter = "x",
               dimension = 1,
               use_initial_points = FALSE,
               vertical = FALSE,
               alpha_lines = 0,
               alpha_points = 0.05,
               arrows = FALSE,
               default_title = TRUE) +
ggplot2::geom_line(data=cwna_data,ggplot2::aes(x=Index,y=Position),colour="red",inherit.aes = FALSE) +
ggplot2::theme_minimal() +
ggplot2::theme(legend.position="none")

Animating plots

The histogram, density, scatter and time series plots can all be animated, to show how the output changes over a sequence of target distributions. Below we show the code for generating (looping) 10 second animations (set by the duration argument) showing how the sir_cwna_model data changes over the sequence of 20 targets.

animate_histogram(sir_cwna_model,
                  parameter = "x",
                  dimension = 1,
                  bins = 20,
                  duration = 10)
animate_density(sir_cwna_model,
                parameter = "x",
                dimension = 1,
                duration = 10)
animate_scatter(sir_cwna_model,
                x_parameter = "x",
                x_dimension = 1,
                y_parameter = "x",
                y_dimension = 2,
                alpha = 0.5,
                max_size = 3,
                duration = 10)

For time series, there are two possible animations. One, animate_time_series, shows how the time series particles evolve over a sequence of (non-time ordered) targets. The other, animate_reveal_time_series, illustrated below on lv_output, animates the time series to show how the population of particles evolves over time.

data(`lv_output`)
animate_reveal_time_series(lv_output,
                           parameters = c("X","Y"),
                           alpha = 0.5,
                           ylimits=c(0,600),
                           duration = 10)

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.