The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.
Neuenschwander, Branson, and Gsponer (2008) (NBG) introduced a derivative of the CRM for dose-escalation clinical trials using the model:
\[ \text{logit} p_i = \alpha + \exp{(\beta)} \log{(x_i / d^*)}, \]
where \(p_i\) is the probability of
toxicity at the \(i\)th dose, \(x_i\), and \(d^*\) is a reference dose. Here \(\alpha\) and \(\beta\) are model parameters on which the
authors place a bivariate normal prior. This model is very similar to
the two-parameter logistic CRM, implemented with
stan_crm(model = 'logistic2'). However, a notable
difference is that the dose, \(x_i\),
enters the model as a covariate. This dispenses with the toxicity
skeleton that is used in the CRM.
escalationThe heavy lifting required to fit the model is performed by
trialr and rstan. escalation
merely composes the model fit in such a way that it can be used with the
myriad dose-selection option provided in this package.
For illustration, let us reproduce the analysis in Neuenschwander, Branson, and Gsponer (2008) that the authors used to demonstrate the flexibility of a two-parameter approach. In a trial of 15 doses, the investigators saw outcomes:
library(escalation)
dose <- c(1, 2.5, 5, 10, 15, 20, 25, 30, 40, 50, 75, 100, 150, 200, 250)
outcomes <- '1NNN 2NNNN 3NNNN 4NNNN 7TT'Creating a dose-escalation model with NBG’s parameters:
model <- get_trialr_nbg(real_doses = dose, d_star = 250, target = 0.3,
alpha_mean = 2.15, alpha_sd = 0.84,
beta_mean = 0.52, beta_sd = 0.8,
seed = 2020)and fitting the model to the observed outcomes:
fit <- model %>% fit(outcomes)
fit
#> Patient-level data:
#> # A tibble: 17 × 4
#> Patient Cohort Dose Tox
#> <int> <int> <int> <int>
#> 1 1 1 1 0
#> 2 2 1 1 0
#> 3 3 1 1 0
#> 4 4 2 2 0
#> 5 5 2 2 0
#> 6 6 2 2 0
#> 7 7 2 2 0
#> 8 8 3 3 0
#> 9 9 3 3 0
#> 10 10 3 3 0
#> 11 11 3 3 0
#> 12 12 4 4 0
#> 13 13 4 4 0
#> 14 14 4 4 0
#> 15 15 4 4 0
#> 16 16 5 7 1
#> 17 17 5 7 1
#>
#> Dose-level data:
#> # A tibble: 16 × 9
#> dose tox n empiric_tox_rate mean_prob_tox median_prob_tox admissible
#> <ord> <dbl> <dbl> <dbl> <dbl> <dbl> <lgl>
#> 1 NoDose 0 0 0 0 0 TRUE
#> 2 1 0 3 0 0.0123 0.00545 TRUE
#> 3 2 0 4 0 0.0314 0.0190 TRUE
#> 4 3 0 4 0 0.0650 0.0478 TRUE
#> 5 4 0 4 0 0.134 0.115 TRUE
#> 6 5 0 0 NaN 0.200 0.183 TRUE
#> 7 6 0 0 NaN 0.262 0.250 TRUE
#> 8 7 2 2 1 0.319 0.310 TRUE
#> 9 8 0 0 NaN 0.371 0.366 TRUE
#> 10 9 0 0 NaN 0.459 0.461 TRUE
#> 11 10 0 0 NaN 0.531 0.538 TRUE
#> 12 11 0 0 NaN 0.657 0.673 TRUE
#> 13 12 0 0 NaN 0.735 0.756 TRUE
#> 14 13 0 0 NaN 0.824 0.846 TRUE
#> 15 14 0 0 NaN 0.870 0.892 TRUE
#> 16 15 0 0 NaN 0.898 0.918 TRUE
#> # ℹ 2 more variables: recommended <lgl>, RealDose <dbl>
#>
#> The model targets a toxicity level of 0.3.
#> The model advocates continuing at dose 7.we see that dose 7 is selected for the next cohort using the metric
of selecting the dose with posterior expected probability of toxicity
closest to the target. In the above output, mean_prob_tox
broadly matches the values plotted in the lower right panel of Figure 1
in Neuenschwander, Branson, and Gsponer
(2008).
There are a few minor shortcomings of the NBG implementation in
escalation & trialr. Firstly, NBG propose
a bivariate normal prior distribution on \(\alpha\) and \(\beta\). However, the implementation in
trialr currently uses independent normal priors. Hopefully,
this will be addressed in a future release of trialr.
Furthermore, NBG propose a method for selecting dose that accounts
for the probability of recommending an overdose. That logic is currently
not implemented in escalation. However, a proposal that
addresses the same issue was presented by Mozgunov and Jaki (2020), is implemented in
escalation, and can be applied to the NBG method:
Fitting the new model to the same outcomes:
Rather than sticking at dose 7, the design now prefers to de-escalate to dose 6:
Mozgunov & Jaki’s method was published in relation to the CRM
design, but it can be applied in escalation to any model
providing posterior samples via the prob_tox_samples
method, including Neuenschwander et al.’s method illustrated
here.
We can use the get_dose_paths function in
escalation to calculate exhaustive model recommendations in
response to every possible set of outcomes in future cohorts.
For instance, at the start of a trial using the NBG model detailed above, we can examine all possible paths a trial might take in the first two cohorts of three patients, starting at dose 2:
We can then compare these to the similar advice from the model that adds Mozgunov & Jaki’s criterion:
We can see in several situations that the second model is more
conservative in escalation, achieving the goal of the authors. Perhaps
unexpectedly, however, the second design escalations to dose 11 after
initial outcomes 2NNN, slightly more aggessively than the
default model which identifies dose 10.
Dose-paths can also be run for in-progress trials where some outcomes have been established. For more information on working with dose-paths, refer to the dose-paths vignette.
We can use the simulate_trials function to calculate
operating characteristics for a design. Let us take the example above,
append it with behaviour to stop when the lowest dose is too toxic, when
9 patients have already been evaluated at the candidate dose, or when a
sample size of \(n=24\) is reached:
dose <- c(1, 2.5, 5, 10, 15, 20, 25, 30, 40, 50, 75, 100, 150, 200, 250)
model <- get_trialr_nbg(real_doses = dose, d_star = 250, target = 0.3,
alpha_mean = 2.15, alpha_sd = 0.84,
beta_mean = 0.52, beta_sd = 0.8,
seed = 2020) %>%
stop_when_too_toxic(dose = 1, tox_threshold = 0.3, confidence = 0.8) %>%
stop_when_n_at_dose(dose = 'recommended', n = 9) %>%
stop_at_n(n = 24)For the sake of speed, we will run just ten iterations:
In real life, however, we would naturally run many thousands of iterations.
Then let us investigate under the following true probabilities of toxicity:
The simulated behaviour is:
set.seed(123)
sims <- model %>%
simulate_trials(num_sims = num_sims, true_prob_tox = sc1, next_dose = 1)
sims
#> Number of iterations: 10
#>
#> Number of doses: 15
#>
#> True probability of toxicity:
#> 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
#> 0.01 0.03 0.10 0.17 0.25 0.35 0.45 0.53 0.60 0.65 0.69 0.72 0.75 0.79 0.80
#>
#> Probability of recommendation:
#> NoDose 1 2 3 4 5 6 7 8 9 10
#> 0.0 0.0 0.0 0.0 0.1 0.1 0.5 0.1 0.1 0.1 0.0
#> 11 12 13 14 15
#> 0.0 0.0 0.0 0.0 0.0
#>
#> Probability of administration:
#> 1 2 3 4 5 6 7 8 9 10 11
#> 0.1282 0.0000 0.0128 0.0385 0.1667 0.2051 0.1026 0.0641 0.0897 0.1538 0.0128
#> 12 13 14 15
#> 0.0256 0.0000 0.0000 0.0000
#>
#> Sample size:
#> Min. 1st Qu. Median Mean 3rd Qu. Max.
#> 21.0 24.0 24.0 23.4 24.0 24.0
#>
#> Total toxicities:
#> Min. 1st Qu. Median Mean 3rd Qu. Max.
#> 6.0 7.0 7.0 7.8 9.0 10.0
#>
#> Trial duration:
#> Min. 1st Qu. Median Mean 3rd Qu. Max.
#> 18.54 23.74 24.67 25.66 27.22 34.42We see that the chances of stopping for excess toxicity and recommending no dose are low. Doses 4-7 are the favourites to be identified.
For more information on running dose-finding simulations, refer to the simulation vignette.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.