The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.
diffobj
v0.3.5
- Options automatically fallback to factory defaults if they are unset
(h/t @gadenbui).
- #158:
Calling
diff* with do.call now works without
warnings.
- #117:
Fix guide detection with very wide wrapped data.frames (h/t @bastician, @overvolting).
v0.3.4
- Add a print method for
ses_dat return values that makes
it easier to interpret the diff.
- #152:
Rewrite the fall-back “O(n)” algorithm that kicks in when there are
max.diffs differences to be more robust (h/t @hadley, @DanChaltiel, @gadenbui).
- Related to #152:
max.diffs=0 used to mean the same as
max.diffs=-1 (i.e. unlimited), but this was undocumented
and an error. max.diffs=0 will now immediately fall back to
the “O(n)” algorithm.
v0.3.3
- Implement experimental .Rout / .Rout.save testing.
- Fix
all.equal test breakages from r79555.
v0.3.1-2
- #150:
Make tests compatible with new
testthat release (h/t @hadley).
- Remove pre-built vignettes and note
testthat change to
waldo release.
v0.3.0
- #143:
Add
ses_dat to provide a more computable version of
ses (h/t @hadley).
- #144:
Re-encode strings to UTF-8 prior to comparison to avoid spurious
encoding-only differences (h/t @hadley).
- #142:
Typos in
standardGeneric in trim/guide generic
definitions.
- Drop attributes from inputs to
diffChr (revealed as an
issue by #142).
- Banish ghosts of
stringsAsFactors.
v0.2.4
- Tests explicitly set
stringsAsFactors=TRUE so they
don’t fail with the anticipated changed for R4.0.
- #140:
Bad link in
?ses.
v0.2.3
This is a bugfix release.
- #136:
Documentation for
ignore.white.space (h/t @flying-sheep) and
max.diffs parameters listed incorrect defaults.
- #135:
Incorrect handling of potential meta data strings when unwrapping
atomics would cause a “wrong sign in by argument” error (h/t @flying-sheep). We
also fixed other bugs related to the handling of meta data in atomic
vectors that were uncovered while debugging this issue.
- #134:
Forwarding
... to diff* functions no longer
breaks substitution of arguments for diff banners (h/t @noamross)..
- #133:
diffFile considers files with equal content but different
locations to be all.equal now (h/t @noamross).
- #132:
Duplicate pager slot for baseline
Pager removed (h/t Bill
Dunlap).
There are also several other small internal changes that in theory
should not affect user facing behavior.
v0.2.2
- Set
RNGversion() due to changes to sampling
mechanism.
v0.2.0-1
Features
- #129:
Allow pager specification via lists rather than full
Pager
objects for easier changes to defaults. As part of this we changed
StyleRaw objects to use default pager instead of
PagerOff.
- #126:
Add embedding diffs in Shiny to vignette.
- #119:
ignore.whitespace now also ignores white space differences
adjoining punctuation.
- #118:
New option to preserve temporary diff file output when using pager (see
?Pager).
- #114:
New options
strip.sgr and sgr.supported allow
finer control of what happens when input already contains ANSI CSI SGR
and how ANSI CSI SGR is handled in string manipulations. Related to
this, options(crayon.enabled=TRUE) is no longer set when
capturing output prior to diff as it used to be. By default pre-existing
ANSI CSI SGR is stripped with a warning prior to comparison.
Bugs
- #131:
Fix missing slot in S4 class definition (discovered by Bill
Dunlap).
- #127:
Width CSS conflicts with bootstrap (reported by @eckyu, debugged/fixed by @cpsievert).
v0.1.11
- #123:
Compatibility with R3.1 (@krlmlr).
- #121:
Vignette describing how to embed diffs in Rmd documents (@JBGruber).
- #115:
Declare HTML page diff encoding/charset as UTF-8 (@artemklevtsov).
v0.1.10
- Comply with CRAN directive to remove references to packages not in
depends/imports/suggests in tests (these were run optionally
before).
- Fix bugs in corner case handling when we hit
max.diffs.
v0.1.9
- Fix test failures caused by changes in tibble output
v0.1.8
v0.1.7
- Fix tests for next
testthat release.
- #107:
Diffs on quoted language
- #108:
Problems caused by copying
crayon functions (@seulki-choi,
- #100:
R_useDynamicSymbols
- #97: 2D
Guidelines fixes for data.table, tibble
- #96:
Warnings when comparing large data tables.
- #94:
Guide detection problems in nested lists.
- #105:
Copyright tweaks.
v0.1.6
- #87:
diffobj is now GPL (>=2) instead of GPL-3.
- #81:
Better handling of mixed UTF-8 / ASCII strings, reported by jennybc
- #88:
correctly handle trimming when empty lists are involved, reported by wch
- #77:
diffObj now favors dispatching to diffPrint
unless diffPrint output is large
- #82:
diffChr and ses now treat NA as
“NA” (needed with change in nchar(NA) in base R)
- #85:
Improved alignment of unwrapped atomic vector diffs
- #83:
Improve pager auto detection (note now ANSI output is only allowed by
default if terminal supports ANSI colors and the system pager is
less, see ?Pager for details)
- #92, #80, #45: basic
implementation of S4 guidelines and trimming (full resolution eventually
with #33)
- #84:
simplify how to call
diffChr for improved performance,
including “optimization” of convert.hz.whitespace.
- #64: fix
line limit in corner case
- More robust handling of external
diff* methods and of
how diffObj calls diffStr and
diffPrint
v0.1.5
- #71:
Buggy diffs b/w data frames when one has sequential row numbers and the
other does not, loosely related to #38
- #69:
Improve performance on outputs with large print/show output, and other
assorted minor optimizations
- #72: Warn
when
style parameter overrides other user supplied
parameters
- #70:
Improve word contrast in YB HTML mode
- #63: Show
all.equal output when objects are not
all.equal but there are no visible differences
- Add Mean Relative Indifference vignette and update vignette
styling
v0.1.4
- #67: Fix
CRAN Binaries
- Clarified that C code is heavily modified and incompatible with
original
libmba implementation
v0.1.3
- First version on CRAN
- #51: use
RStudio viewport to display HTML diffs when running in RStudio (h/t Noam
Ross)
- #54: #55, scale HTML
output to viewport width (see
?Style)
- #53:
default term colors computed on run instead of on package load
- #56:
disable wrap for HTML output
- HTML output now captured with default width 80 since there is no
explicit relationship between HTML viewport width and
getOption("width")
- The
style parameter now accepts lists to use as
instantiation arguments for Style objects (see
?Style)
- Fix subtle rendering and formatting application flaws
- Switch Travis shields to SVG per Gábor Csárdi
- Improve in-hunk alignment of partially matching lines
- Compile with
-pedantic, fix related warnings Arun
- Improved coverage and more robust testing
- Several internal structure changes to accommodate improvements
v0.1.2
- #46:
Guide and Trim Problems with Lists
- #47:
Output Format in non-ANSI Terminals Without Browser (reported by Frank)
- #48:
make_blocking Default prompt Confusing (reported by Frank)
- #49:
In-Hunk Word Diffs Issues when Unwrap-diffing Atomics
- #50: CSS
Lost in Rstudio Server Sessions (reported by Steven
Beaupré)
v0.1.1
- Turn off unwrapping for named atomic vectors (see #43)
- #44:
Proper handling of NULL objects in
diffStr
- #41:
Compilation Issues in Winbuilder
v0.1.0
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.