The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.

Warnings, Messages, and Errors

This vignette provides documentation for the different warnings and messages that are implemented for the package. Results of calls (eg printing of data frames following set_contrasts) will be hidden, but warnings and messages will still be shown. Code chunks will be self-contained, so bear with a little repetitiveness. I will primarily be using the sum_code function because it is the shortest one to write.

library(contrastable)
library(rlang)

Common Messages

User will be notified if a non-factor column is coerced to a factor with set_contrasts and enlist_contrasts:

set_contrasts(mtcars, cyl ~ sum_code)
#> Converting to factors: cyl

User will be notified if there exist other factors in the dataframe that have not been set in a call to set_contrasts or enlist_contrasts. Unordered factors are color coded in blue, while ordered factors are colored red. The default contrasts from options("contrasts") are also displayed and color coded accordingly.

my_data <- mtcars
my_data$gear <- ordered(my_data$gear)
my_data$carb <- factor(my_data$carb)
my_data$cyl <- factor(my_data$cyl)

set_contrasts(my_data, cyl ~ sum_code)
#> Expect contr.treatment or contr.poly for unset factors: gear carb

Ordered factors by default use contr.poly and return coefficient estimates interpretable as nth-degree polynomial trends. Typically, contrast matrices are set for unordered factors, so ordered factors are a bit of a special case. So, user will be notified if setting the contrasts for an ordered factor with set_contrasts or enlist_contrasts

my_data <- mtcars
my_data$gear <- ordered(my_data$gear)

set_contrasts(my_data, gear ~ sum_code)
#> These factors are ordered, you may lose contr.poly: gear

Warnings

User will be warned if attempting to set contrasts on a factor with only one level. If the user sets contrasts for multiple variables, any variables with more than one level will successfully be computed. However, the variables with only one level will just show no results. Note the output in the example below.

my_data <- data.frame(foo = factor("A"),
                      boo = factor(c("B", "C")))

enlist_contrasts(my_data, foo ~ sum_code, boo ~ sum_code)
#> Warning: Contrasts undefined for factors with only one level: foo
#> $boo
#>    C
#> B -1
#> C  1

Related to the above, if the user only sets contrasts on factors that have only one level, an error will be thrown. The above warning will also be shown.

my_data <- data.frame(foo = factor("A"),
                      boo = factor(c("B", "C")))

try(enlist_contrasts(my_data, foo ~ sum_code))
#> Expect contr.treatment or contr.poly for unset factors: boo
#> Warning: Contrasts undefined for factors with only one level: foo
#> Error in enlist_contrasts(my_data, foo ~ sum_code) : 
#>   No factors with more than 1 level found

Contrastable provides some flexibility in how contrasts are passed to formulas. Under the hood, methods are defined for the following object classes:

You’ll receive a warning if you use something else and the default contrast (depending on ordered or unordered) will be used instead.

my_matrix <- sum_code(3)  # current class is "matrix" "array"
class(my_matrix) <- "foo" # now class is "foo"

set_contrasts(mtcars, cyl ~ my_matrix) # idk what to do with "foo" objects
#> Converting to factors: cyl
#> Warning in use_contrasts.default(factor_col = get(params[["factor_col"]], :
#> Can't set contrasts with object of class foo. Using unordered default
#> contr.treatment

So long as the object inherits one of the above classes though it will work as expected. Accordingly, note that no class coercion happens here.

class(my_matrix) <- c("foo", "matrix", "array")
set_contrasts(mtcars, cyl ~ my_matrix) # idk what "foo" is but i know "matrix"!
#> Converting to factors: cyl

Note that if you accidentally quote the function name, you will receive an error instead because it thinks you’re trying to set contrasts with an atomic character object.

try(set_contrasts(mtcars, cyl ~ "sum_code")) # sum_code shouldnt be in quotes
#> Converting to factors: cyl

The same issue can commonly occur if you don’t order the right hand side correctly. The first term should always be a contrast-generating function or a variable name that’s been assigned an object of the above classes. Failure to do this can lead to other kinds of errors depending on what the first element to the right hand side is. I’ve tried to document a few cases of illformedness, but I can’t do every case.

try(set_contrasts(mtcars, cyl ~ 4 + sum_code)) # bad!
#> Converting to factors: cyl
try(set_contrasts(mtcars, cyl ~ sum_code + 4)) # good!
#> Converting to factors: cyl

# These give different kinds of errors, all are ill-formed
try(set_contrasts(mtcars, cyl ~ +4 + sum_code)) 
#> Converting to factors: cyl
try(set_contrasts(mtcars, cyl ~ c("a", "b") + sum_code)) 
#> Converting to factors: cyl
try(set_contrasts(mtcars, cyl ~ 1 + 2 + 3 + sum_code)) 
#> Converting to factors: cyl
#> Warning in is.na(params[[which_param]]): is.na() applied to non-(list or
#> vector) of type 'symbol'

hypr integration

hypr is another package for contrast coding but focuses on setting the desired comparisons for a factor manually. The philosophy there is that all comparisons should be explicitly written down, while the philosophy with this package is that well-defined contrast schemes should be implemented in a way that is deterministic and not prone to typing errors. Accordingly, the special syntax this package provides is ignored when using hypr objects.

Note that the examples here are set to not be run so that you’re not forced to have the hypr package installed in order to install the package/build the vignette.

library(hypr)
my_data <- data.frame(foo = factor(c("A", "B", "C")))

hypr_object <- hypr::hypr(A ~ B, A ~ C)

set_contrasts(my_data, foo ~ hypr_object + "B" * "B" - "C")
Warning messages:
1: In use_contrasts.hypr(factor_col = get(params[["factor_col"]], model_data),  :
  reference_level ignored when using hypr object
2: In use_contrasts.hypr(factor_col = get(params[["factor_col"]], model_data),  :
  set_intercept ignored when using hypr object
3: In use_contrasts.hypr(factor_col = get(params[["factor_col"]], model_data),  :
  drop_trends ignored when using hypr object

hypr objects don’t need access to the levels in a factor, so there’s an opportunity for mismatches in level names to arise. The matrix might still work out to be what you intend, but this isn’t guaranteed.

my_data <- data.frame(foo = factor(c("A", "B", "C")))

hypr_object <- hypr::hypr(varA ~ varB, varA ~ varC)

set_contrasts(my_data, foo ~ hypr_object)$foo
Warning message:
In use_contrasts.hypr(factor_col = get(params[["factor_col"]], model_data),  :
  Levels in hypr object not found in factor column `foo`: varA, varB, varC
Contrasts may be misspecified.

Generally, this package isn’t really designed with the hypr-user in mind. But, so long as you’re mindful of the level names and the number of levels, then you can plug in hypr objects freely in conjunction with other methods. This is helpful if you need to use a custom matrix for just one variable, but the rest can use “standard” contrasts.

my_data <- data.frame(foo = factor(c("A", "B", "C")),
                      boo = factor(c("A", "B", "C")))

hypr_object <- hypr::hypr(A ~ B, A ~ C)

enlist_contrasts(my_data, foo ~ hypr_object, boo ~ sum_code)

glimpse_contrasts safety checks

glimpse_contrasts has a fairly extensive set of warnings, so I’m giving it its own subsection. Broadly, these warnings relate to mismatches between what the user defines in a series of formulas and what is actually set on the provided dataframe. Special to these warnings is that they will provide written out R code that the user can copy and paste from the console to fix the issue— where “fix” refers to “setting the contrasts to the dataframe explicitly with set_contrasts”.

User will be warned if the contrast matrix for a factor in a dataframe does not match the contrasts defined by the provided formulas.

my_data <- data.frame(foo = factor("A"),
                      boo = factor(c("B", "C")))

glimpse_contrasts(my_data, boo ~ sum_code)
#> Warning: Contrasts for these factors in `my_data` don't match formulas:
#>  - boo
#> To fix, be sure to run:
#> my_data <- set_contrasts(my_data, 
#>                          boo ~ sum_code)

Note that you can also define the contrast formulas in a list, and this will be reflected in the warning as well.

my_data <- data.frame(foo = factor("A"),
                      boo = factor(c("B", "C")))

# Define our contrasts outside the call
clist <- list(boo ~ sum_code)

glimpse_contrasts(my_data, clist) # Note the final line in the warning
#> Warning: Contrasts for these factors in `my_data` don't match formulas:
#>  - boo
#> To fix, be sure to run:
#> my_data <- set_contrasts(my_data, clist)

Using some of the contrast-generating matrix functions in this package with set_contrasts or enlist_contrasts will automatically set the comparison labels (i.e., the column names of the contrast matrix). However, using these functions on their own will not specify the labels (because they merely return matrices given some arbitrary number of levels). So, if you manually set the contrasts to a factor without also defining the comparison labels, then the labels will be missing. When using the same contrast generating function in glimpse_contrast, the user will be warned that the comparison labels don’t match (even though the contrast matrices do).

Here’s an example when the labels are missing:

my_data <- mtcars
my_data$cyl <- factor(my_data$cyl)

# This will erase the column names
contrasts(my_data$cyl) <- helmert_code(3)

glimpse_contrasts(my_data, cyl ~ helmert_code)
#> Warning: Comparison labels for contrasts in `my_data` don't match:
#>  - cyl   (expected `<6, <8` but found ``)
#> To fix, be sure to run:
#> my_data <- set_contrasts(my_data, 
#>                          cyl ~ helmert_code)

And here’s an example when they exist but don’t match

my_data <- mtcars
my_data$cyl <- factor(my_data$cyl) # contr.treatment by default

glimpse_contrasts(my_data, cyl ~ treatment_code | c("6vs4", "8vs4"))
#> Warning: Comparison labels for contrasts in `my_data` don't match:
#>  - cyl   (expected `6vs4, 8vs4` but found `6, 8`)
#> To fix, be sure to run:
#> my_data <- set_contrasts(my_data, 
#>                          cyl ~ treatment_code | c("6vs4", "8vs4"))

The user will be warned when specifying contrasts with glimpse_contrasts for a variable that isn’t a factor. So, set_contrasts will coerce the variable to a factor, but glimpse_contrasts doesn’t modify the dataframe it’s given.

my_data <- mtcars

glimpse_contrasts(my_data, cyl ~ sum_code)
#> Warning: These vars in `my_data` are not factors:
#>  - cyl
#> To fix, be sure to run:
#> my_data <- set_contrasts(my_data, 
#>                          cyl ~ sum_code)

ALL of the above described warnings can occur at the same time. They are combined into a single warning. Note that when warned about the comparison labels not matching, the numeric matrices are nonetheless the same. Typically, when the matrices are different, the labels will also be different, so the latter isn’t reported when the matrices differ to save space.

my_data <- mtcars
my_data$cyl <- factor(my_data$cyl) # contr.treatment by default
my_data$carb <- factor(my_data$carb)
contrasts(my_data$cyl) <- sum_code(3)
my_data$am <- factor(my_data$am)

glimpse_contrasts(my_data, 
                  cyl ~ sum_code, 
                  carb ~ sum_code, 
                  gear ~ sum_code,
                  am ~ treatment_code | c("diffLabel"))
#> Warning: These vars in `my_data` are not factors:
#>  - gear
#> Contrasts for these factors in `my_data` don't match formulas:
#>  - carb
#> Comparison labels for contrasts in `my_data` don't match:
#>  - cyl   (expected `6, 8` but found ``)
#>  - am    (expected `diffLabel` but found `1`)
#> To fix, be sure to run:
#> my_data <- set_contrasts(my_data, 
#>                          cyl ~ sum_code,
#>                          carb ~ sum_code,
#>                          gear ~ sum_code,
#>                          am ~ treatment_code | c("diffLabel"))

Currently, glimpse_contrasts depends on being provided with the desired contrast formulas/matrices to provide a summary table correctly. If you set the contrasts, then try to summarize the dataframe without the the same formulas, then you’ll get a warning that the factor (whether unordered or ordered) does not match the default contrasts that would normally be expected. In the example below, the contrasts are set to sum_code, but because the default contrasts for unordered factors is contr.treatment, the contrast matrices won’t match for my_data$cyl. The scheme will be reported as "???"

my_data <- set_contrasts(mtcars, cyl ~ sum_code, verbose = FALSE)

glimpse_contrasts(my_data)
#> Warning in .warn_if_nondefault(default_contrasts, unset_factors, factor_sizes, : Unset factors do not use default contr.treatment or contr.poly. Glimpse table may be unreliable.
#>  - cyl
#>     factor n level_names scheme reference  intercept orthogonal centered
#> cyl    cyl 3     4, 6, 8    ???         4 grand mean         NA       NA
#>     dropped_trends explicitly_set
#> cyl             NA          FALSE

Currently, there is not an elegant way for glimpse_contrasts to check what the contrast scheme is based solely on the resulting matrix. Moreover, many contrast schemes are the same when the number of levels is 2, meaning that a matrix of +.5/-.5 could be scaled_sum_code or helmert_code (among others). I’m also reluctant to add additional attributes to the dataframe for the sole purpose of glimpse_contrasts being able to summarize things.

The most robust solution if you want to make use of glimpse_contrasts is to specify a list of contrast matrices, then pass the list to set_contrasts and glimpse_contrasts.

contrast_list <- list(cyl ~ scaled_sum_code, 
                      carb ~ sum_code, 
                      gear ~ sum_code,
                      am ~ treatment_code | c("diffLabel"))

my_data <- set_contrasts(mtcars, contrast_list, verbose = FALSE)
glimpse_contrasts(my_data, contrast_list)

Errors

Here are some common errors, though not all of them are errors from contrastable per se.

You’ll receive an error if you use a matrix that’s a different size from what the contrast matrix should be. Specifically, contrasts matrices for a factor with n levels should be size nx(n-1).

my_matrix <- sum_code(4)
try(set_contrasts(mtcars, cyl ~ my_matrix)) # cyl has 3 levels, not 4
#> Converting to factors: cyl
#> Error in use_contrasts.matrix(factor_col = get(params[["factor_col"]],  : 
#>   Matrix given to code_by is size 4x3 but factor_col contrast matrix is size 3x2.

You’ll receive an error if you try to set the reference level (or intercept) to a level that doesn’t exist in the factor.

try(set_contrasts(mtcars, cyl ~ sum_code + 100))
#> Converting to factors: cyl
#> Error in .switch_reference_if_needed(new_contrasts, reference_level, new_reference_index) : 
#>   Reference level not found in factor levels
try(set_contrasts(mtcars, cyl ~ sum_code * "blah"))
#> Converting to factors: cyl
#> Error in .set_intercept(new_contrasts, set_intercept) : 
#>   Specified level to use as intercept not found in factor level names

You’ll receive an error if you accidentally use = instead of ~

try(set_contrasts(mtcars, cyl = sum_code))
#> Error : In `tools::buildVignettes(dir = ".", tangle = TRUE)`: 
#> `x` must be a formula
#> ℹ Did you use = instead of ~ when setting the contrast?

You’ll receive an error if you accidentally specify contrasts for the same variable more than once:

try(set_contrasts(mtcars,
                         cyl ~ sum_code, 
                         cyl ~ scaled_sum_code))
#> Error : In `tools::buildVignettes(dir = ".", tangle = TRUE)`: 
#> Names must be unique.
#> ✖ These names are duplicated:
#>   * "cyl" at locations 1 and 2.
#> ℹ Left hand side of multiple formulas evaluated to the same column name

try(set_contrasts(mtcars, 
                         cyl + gear ~ sum_code,
                         cyl ~ scaled_sum_code))
#> Error : In `tools::buildVignettes(dir = ".", tangle = TRUE)`: 
#> Names must be unique.
#> ✖ These names are duplicated:
#>   * "cyl" at locations 1 and 3.
#> ℹ Left hand side of multiple formulas evaluated to the same column name

try(set_contrasts(mtcars, 
                         where(is.numeric) ~ sum_code, 
                         cyl ~ scaled_sum_code))
#> Error : In `tools::buildVignettes(dir = ".", tangle = TRUE)`: 
#> Names must be unique.
#> ✖ These names are duplicated:
#>   * "cyl" at locations 2 and 12.
#> ℹ Left hand side of multiple formulas evaluated to the same column name

these_vars <- c("cyl", "gear")

try(set_contrasts(mtcars, 
                         all_of(these_vars) ~ sum_code, 
                         where(is.numeric) ~ scaled_sum_code))
#> Error : In `tools::buildVignettes(dir = ".", tangle = TRUE)`: 
#> Names must be unique.
#> ✖ These names are duplicated:
#>   * "cyl" at locations 1 and 4.
#>   * "gear" at locations 2 and 12.
#> ℹ Left hand side of multiple formulas evaluated to the same column name

You’ll receive an error if you accidentally forget to pass the dataframe:

try(set_contrasts(cyl ~ sum_code))
#> Error in enlist_contrasts(model_data, !!!formulas, verbose = verbose) : 
#>   Formula passed to model_data, did you forget to pass a data frame?

You’ll receive an error if you forget to pass any contrasts formulas:

try(set_contrasts(mtcars))
#> Error in .warn_if_onelevel(lhs_variables[is_onelevel_factor]) : 
#>   If factor names are not provided, the model data and factors being set must be provided

Variables with only one level will be ignored, but you’ll receive an error if there are no remaining variables with more than one level (i.e., if you only specify one-level factors). Note that you’ll still get the warning message.

try(set_contrasts(data.frame(a = factor(1)),
                         a ~ sum_code))
#> Warning: Contrasts undefined for factors with only one level: a
#> Error in enlist_contrasts(model_data, !!!formulas, verbose = verbose) : 
#>   No factors with more than 1 level found

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.