The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.

Quick Guide to RTIGER

1.Introduction

2.Installation

2.1.Pre-requisites

2.2.Problems installing Julia

3.Preparing input data

4.Using RTIGER

4.1. Running RTIGER

4.2. Autotune the R parameter

5.RTIGER Output

Introduction

Accurate identification of meiotic crossing-over sites (COs) is essential for correct genotyping of recombining samples. RTIGER is a method for predicting genome-wide COs using allele-counts at pre-defined SNP marker positions. RTIGER trains a Hidden Markov Model (HMM) where genomic states (homozygous parent_1, homozygous parent_2 or heterozygous) correspond to the hidden state and the allele-counts as the observed variable. COs are identified as transitions in the HMM state.

To account for variation in the coverage of sequencing data, RTIGER uses Viterbi Path Algorithm and the rigidity parameter. This parameter defines the minimum number of SNP markers required to support a state-transition. This filters out low-confidence state-transitions, improving COs identification performance.

Installation

Pre-Requisites:

RTIGER is an R package meant to be used for Biological data. For that reason, we rely in some Bioconductor libraries that needs to be installed beofrehand to ensure a smooth installation of the package from CRAN. To install Bioconductor and the packages needed, run on the R terminal:

if (!require("BiocManager", quietly = TRUE))
    install.packages("BiocManager")
BiocManager::install(version = "3.14")

BiocManager::install(c("GenomicRanges", "GenomeInfoDb", "TailRank", "IRanges", "Gviz"))

Now we are ready to install RTIGER. As mentioned before, RTIGER is an CRAN package and can be installed with the simple command line:

install.packages("RTIGER")

Neverhteless, to get the latest and debugged versions, we recommend you install it from github using the devtools package:

install.packages("devtools")
library(devtools)
install_github("rfael0cm/RTIGER")

Once the RTIGER package is installed, next is to install the JULIA libraries needed to run the analysis. We have simplified this step by just running the following function:

library(RTIGER)
setupJulia()

Now, we have all the necessary prerequisists to start using RTIGER and obtain the maximum information from our data sets. RTIGER needs specific data format to work. On the next section we will describe how it must be enoced and saved.

Problems installing Julia

Working at the interface between R and Julia might be a bit troublesome to make it work. If when runing the function setupJulia(), R is unable to find Julia, this might be a solution: First, download the binaries from the julia webpage. As mentioned before, we recommend the version 1.0.5 of Julia. Unzip the file in your machine and the run the following script:

setupJulia(JULIA_HOME = full_path_to_Julia_bin_folder)

Preparing input data

RTIGER uses the allele-count information at the SNP marker positions. The SNP markers correspond to differences between the two genotypes (i.e. parent_1 vs parent_2). RTIGER requires as input one allele-count file for each sample. The allele-count file should be in tab-separated value format, where each row corresponds to a SNP marker. The format of the file is described below:

Column Field Type Description
1 SeqID String Chromosme ID
2 Pos init(>=0) Position of the SNP marker
3 RefA char Reference allele
4 RefC int(>=0) Number of reads with reference alele
5 AltA char Alternate allele
6 AltF int(>=0) Number of reads with alternate allele

Ther order of the columns is EXTREMELY IMPORTANT. RTIGER ensures that the data type of each column is the correct. But the interpretation of references allele and alternate allele is completely arbitrary and it is the user who defines them. Moreover, the chromosome and position is crucial to run our algorithm since we group together consecutive SNPs from the same chromosome.

The SNPs can be identified using any generic SNP identification pipeline. For example look this method.

SNPs in repetitive regions should be filtered out. Further, as crossing-over usually takes place in syntenic regions between the two genome, for best results, only SNPs in syntenic regions should be selected as markers. If whole genome assemblies are present for both genomes, then this can be easily achieved using methods like SyRI.

NOTE 1: RTIGER assumes that all samples have similar sequencing coverage and, hence, similar distribution of the allele-count values. It does not check or normalise for sequencing coverage variation.

NOTE 2: Crossing-over resolution depends on sequenced marker density. Low sequencing coverage could result in few informative markers, which in turn could decrease resolution CO prediction.

NOTE 3: RTIGER is designed to be robust against individual outliers, however, the user should check for “bad” markers, i.e. marker positions that are prone to mismapping. These markers result in high allele-count at that position.

Using RTIGER

Running RTIGER

To run RTIGER, first we need to invoke julia and the package. To this to work, be sure that everythink run smoothly on the installation section.

library(RTIGER)
setupJulia()
sourceJulia()

The function sourceJulia() will need to be run every single time that we load RTIGER. The two previous lines of code should be run always. If the machine has several versions of Julia, it can be specified which version to use in the setupJulia() function:

setupJulia(JULIA_HOME = "/directory/to/Julia/binaries")

Creating input objects

The primary input for RTIGER is a data-frame termed expDesign. The first column of expDesign should have paths to allele-count files for all samples and the second column should have unique samples IDs. The columnames should be “files” and “name” to specify the file path and sample name respectivley. We recommend to use full path to the files to avoid further problems. An example of how to create the data-frame using the example data provided by our package:

# Get paths to example allele count files originating from a
# cross between Col-0 and Ler accession of the A.thaliana
file_paths = list.files(system.file("extdata",  package = "RTIGER"), full.names = TRUE)

# Get sample names
sampleIDs <- basename(file_paths)

# Create the expDesign object
expDesign = data.frame(files=file_paths, name=sampleIDs)

print(expDesign)

RTIGER also requires chromosome lengths for the parent_1. These need to be provided as a named vector where the values are chromosome lengths and the names are chromosome ids. For our example, we have included the length of the five autosomal chroomosomes in Arabidopsis Thaliana and it can be invoqued as:

# Get chromosome lengths for the example data included in the package
chr_len <- RTIGER::ATseqlengths
names(chr_len) <- c('Chr1' , 'Chr2', 'Chr3', 'Chr4', 'Chr5')
print(chr_len)

Note: It is important the that the names of the vector match exactly with the chromosome names in your data files. If any of the files uses another coding for the chromosomes, RTIGER will rise and error. Be consistent!

Finding crossing-over sites using RTIGER

RTIGER does model training, COs identification, per sample and summary plots creation using a single function:

myres = RTIGER(expDesign = expDesign,
               outputdir = "/srv/netscratch/dep_mercier/grp_schneeberger/projects/SynSearch/tests",
               seqlengths = chr_len,
               rigidity = 20,
               save.results = TRUE)

The rigidity parameter defines the required minimum number of continuous markers that together support a state change of the HMM model. Smaller rigidity values increase the sensitivity in detecting COs that are close to each other, but may result in false-positive CO identification because of variation in sequencing coverage. Larger rigidity values improve precision but COs that are close to each other might not be identified. See section Autotune the R parameter. A second internal step is run, called post-processing. On this step, we fine tune the limits of each state by looking closely to the borders of two consecutive states. We can do that in an efficent manner since we look into state segments which the length is equal to the rigidity value. If the user would prefer to cancel this step, it can be done by setting post.processing=FALSE. Look documentation for more information about this funcion.

Autotune the R parameter

Our R package includes an algorithm designed to assist users in selecting the optimal R value for their data set. The algorithm achieves this by minimizing false positive segments (FP) and false negative segments (FN) through the RTIGER method. FP segments are those that do not exist in the actual data set, while FN segments are those that are not annotated by the model.

The algorithm takes into account two parameters - sequencing depth and the number of CO per megabase - to determine the best R value for the given experiment. Users can either provide these values themselves using the average_coverage and crossovers_per_megabase parameters or allow the algorithm to compute them directly from the dataset. The average_coverage is computed as the mean coverage at all positions in the experiment, while the of CO per megabase is computed after an initial round of model fitting using the user-provided parameters.

myres = RTIGER(expDesign = expDesign,
               outputdir = "/srv/netscratch/dep_mercier/grp_schneeberger/projects/SynSearch/tests",
               seqlengths = chr_len,
               rigidity = 20,
               autotune = TRUE,
               save.results = TRUE)

This function will first compute an rhmm model with the R value provided by the user, find the optimum R parameter and then fit the model with this value.

Alternatively, if the user has already trained a model with RTIGER, they can use the optimize_R() function to find the optimal R value. This function requires the RTIGER object and the same parameters mentioned previously (average_coverage and crossovers_per_megabase) to estimate the value. If these values are not provided, they will be computed experimentally. For more experienced users who want a more detailed understanding of how the rigidity value was selected, the function can be run with the option save_it = TRUE and a directory specified in savedir. This will save the plots in the desired directory. For a more in-depth interpretation of the plots, we refer readers to the supplementary documentation provided in our manuscript.

best_R = optimize_R(myres)

Note: This funciton will only provide the optimum R value and generate the plots. If the user wants to use this suggested R value it should train again the model from scratch but using the best_R value and autotune = FALSE:

myres = RTIGER(expDesign = expDesign,
               outputdir = "/srv/netscratch/dep_mercier/grp_schneeberger/projects/SynSearch/tests",
               seqlengths = chr_len,
               rigidity = best_R,
               autotune = FALSE,
               save.results = TRUE)

RTIGER Output:

RTIGER identifies COs for each sample level and provides summary plots and statistics for each sample as well as for the entire population. If the user wants to acces to the data and obtain their own analysis done with R, they can be retrieved accesing inside the specific class:

myViterbi = myres@Viterbi

This object is a list of Genomic Ranges objects that contain the raw info and the decoded Viterbi using the RTIGER algorithm. #### Per sample output RTIGER creates a folder for each sample in the outputdir. This folder contains:

Summary plots for the population (THE PLOTS AND THE DESCRIPTION HERE NEEDS MORE WORK)

RTIGER creates four summary plots after aggregating results for all samples.

Analysing backcrossed populations

Backcrossed populations are formed by crossing a hybrid organism with one of its parent. These populations are different from the populations based on outcrossing as only two genomic states are possible (homozygous for the backrossed parent and heterozygous for both parents). To identify COs in such population, set nstates=2 in the RTIGER command. {r echo=TRUE, eval=FALSE} myres = RTIGER(expDesign = expDesign, outputdir = "PATH/TO/OUTPUT/DIR", seqlengths = chr_len, rigidity = 200, nstates=2)

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.