The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.

Introduction to the R3port package

Richard Hooijmaijers

2023-09-22

Introduction

The R3port package is developed to easily create pdf or html reports including tables, listings and plots created in R. The reporting idea was initiated within the context of clinical research, where listings for pharmacokinetics and safety are generated. The package was set up such that it is generic enough to be used in other fields too.

The main options to create reports in R are knitr or rmarkdown. These packages are perfect for writing small to medium sized documents. Especially when you want to add code, plots or tables to help tell the story. There are however times when you’re working in an R script and just want to see how a table or plot look like in a browser or pdf. Also when someone else writes the report or it has relatively little R results, knitr or rmarkdown might not be the best option There are simple options like png() and pdf() or more advanced within packages like xtable. With packages like tables, greport, rapport or startgazer you can also directly create (full) reports including R results. But I believe there is a gap between lower level flexibility and the more specialized packages Within this vignette I will try to explain my preferred workflow (as simple as possible) and how I implemented it in the package. To demonstrate the usage of the package the tips dataset from the reshape2 package was used as this dataset has a nice combination of numerical and discrete values:

library(R3port)
library(reshape2)
data(tips)
tips$day <- factor(tips$day,levels=c("Thur","Fri","Sat","Sun" ),ordered = TRUE)
head(tips)
##   total_bill  tip    sex smoker day   time size
## 1      16.99 1.01 Female     No Sun Dinner    2
## 2      10.34 1.66   Male     No Sun Dinner    3
## 3      21.01 3.50   Male     No Sun Dinner    3
## 4      23.68 3.31   Male     No Sun Dinner    2
## 5      24.59 3.61 Female     No Sun Dinner    4
## 6      25.29 4.71   Male     No Sun Dinner    4

Calculation functions

The package includes a few simple calculation functions. Say we want to know basic statistics for the total bill per gender, day of the week and time of day. the following can be done to achieve this:

tbl1 <- means(tips,variable="total_bill",by=c("sex","day","time"),total="sex")
head(tbl1,20)
##       sex  day   time statistic value
## 1  Female Thur Dinner         N     1
## 2  Female Thur  Lunch         N    31
## 3  Female  Fri Dinner         N     5
## 4  Female  Fri  Lunch         N     4
## 5  Female  Sat Dinner         N    28
## 6  Female  Sun Dinner         N    18
## 7    Male Thur  Lunch         N    30
## 8    Male  Fri Dinner         N     7
## 9    Male  Fri  Lunch         N     3
## 10   Male  Sat Dinner         N    59
## 11   Male  Sun Dinner         N    58
## 12  Total Thur Dinner         N     1
## 13  Total Thur  Lunch         N    61
## 14  Total  Fri Dinner         N    12
## 15  Total  Fri  Lunch         N     7
## 16  Total  Sat Dinner         N    87
## 17  Total  Sun Dinner         N    76
## 18 Female Thur Dinner      Mean 18.78
## 19 Female Thur  Lunch      Mean 16.65
## 20 Female  Fri Dinner      Mean 14.31

The function above calculates a standard set of descriptive statistics frequently used in reporting clinical results. Also it places the results in a long format data frame (for easy processing in the other functions). There are some options for calculation of totals and number of digits in output but mainly it uses plyr to do the work. For this reason a predefined set of statisitcs was chosen as it is quite easy to calculate other statistics just using plyr.

Using a similar function, the frequencies within a data frame can be calculated. Let’s say we want to know the frequencies of each gender, day of the week and time of day within the data frame. Something like the following can be used:

tbl2       <- freq(tips,vars=c("sex","day","time"),total=c("sex","day"),spacechar = "~")
head(tbl2)
##      sex  day   time dnm Freq  Perc   FreqPerc
## 1 Female Thur Dinner 244    1  0.41  1~~(0.41)
## 2 Female Thur  Lunch 244   31 12.70 31~(12.70)
## 3 Female  Fri Dinner 244    5  2.05  5~~(2.05)
## 4 Female  Fri  Lunch 244    4  1.64  4~~(1.64)
## 5 Female  Sat Dinner 244   28 11.48 28~(11.48)
## 6 Female  Sun Dinner 244   18  7.38  18~(7.38)

In general the base of the function is the default table within R. Although percentages are also given. Options are available for the denominator, calculation of totals and taking duplicates into account. This was mainly inspired by clinical safety analyses.

The doc functions

The package has two sets of functions to create documents in either tex (and pdf) or html format. The doc functions ltx_doc and html_doc are quite generic in the sense that any kind of character vector can be included. This means simple text can be added to a document or the output of functions that can create TeX/html coding. The following example demonstrates how it works

ltx_doc("This is just some \\emph{text}")
## \documentclass{article}
## \usepackage[ landscape,a4paper,top=1in, bottom=1.2in, left=0.75in, right=0.75in]{geometry}
## \usepackage{graphicx,longtable,amsfonts,booktabs,fancyhdr,lastpage,hyperref,bookmark,caption,listings,float}
## \usepackage[figuresleft]{rotating}
## \setlength\parindent{0pt}
## \setlength{\LTleft}{0pt}
## \setlength{\LTcapwidth}{8in}
## \pagestyle{fancy}
## \renewcommand{\headrulewidth}{0.4pt}
## \renewcommand{\footrulewidth}{0.4pt}
## \cfoot{}\rfoot{}\lhead{\today}\rhead{\thepage\ of \pageref{LastPage}}
## \makeatletter \renewcommand*\l@table{\@dottedtocline{1}{1.5em}{6em}} \makeatother
## \makeatletter \renewcommand*\l@figure{\@dottedtocline{1}{1.5em}{6em}} \makeatother
## \begin{document}
## This is just some \emph{text}
## \end{document}
html_doc("This is just some <em>text</em>")
## <!DOCTYPE html>
## <html>
## <title> report </title>
## <head>
##   <link rel='stylesheet' href='style.css' type='text/css'>
## </head>
## <body>
## This is just some <em>text</em>
## </body>

At first sight it might seem that there is little added value in the above function, however it’s also possible to output the results of xtable or similar packages. Combine this with an output statement and you can directly see the compiled pdf (or tex if you like) which is opened by default. The same is goes for the html but without compilation. The next example demonstrates this. The resulting html and pdf files for this and all subsequent examples are available in the links below the code block. Also in some examples the html version is not displayed but works almost the same as the latex version.

library(xtable)
xtbl     <- means(tips,variable="total_bill",by=c("day"))
xtbl_ltx <- print(xtable(xtbl),print.results=FALSE)
ltx_doc(xtbl_ltx,out="out1.tex")

xtbl_html <- print(xtable(xtbl),print.results=FALSE,type="html", html.table.attributes = "class=table")
html_doc(xtbl_html,out="out1.html",
         css="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.6/css/bootstrap.min.css")

out1.pdf
out1.html

The list functions

With the list functions you can directly output a data frame without using xtable. The function is intended to display a data frame a bit more attractive. Within the following example the header is be adapted and the variables are grouped and ordered. Furthermore a title, footnote and column width is adapted

lst1 <- means(tips,variable="tip",by=c("sex","day"),pack=2)
lst2 <- means(tips,variable="total_bill",by=c("sex","day"),pack=2)
lst  <- merge(lst1,lst2,by=c("sex","day","statistic"))
names(lst)[4:5] <- c("tip","Total Bill")

ltx_list(lst,vargroup=c("","","","income","income"),group = 2, title="a listing",
         fill="-",footnote="a footnote",mancol="p{3cm}llll",out="out2.tex")

An html document can be created quite similar, with the exception of the column width option

html_list(lst,vargroup=c("","","","income","income"),group = 2,title="a listing",
          fill="-",footnote="a footnote",out="out2.html")

out2.pdf
out2.html

The table functions

The most comprehensive functions are ltx_table and html_table. With these functions it is possible to reshape the data before presenting the results. This can make the results easier to read and offers the possibility to tweak the table header. Because the data is transposed to a wide format it is important to keep the results “unique”. Read more about aggregating in reshape2::dcast which is used in this function.The following example demonstrates a common usage of the function:

ltx_table(tbl1,x=c("sex","statistic"),y=c("day","time"),var="value",
          title="total bill statistics",xabove=TRUE,out="out3.tex")
html_table(tbl1,x=c("sex","statistic"),y=c("day","time"),var="value",
          title="total bill statistics",xabove=TRUE,out="out3.html")

out3.pdf
out3.html

The xabove option makes it possible to group the data and to save space. the header has two levels as two variables are selected to cast the results. Although you can add many levels this way, it is advised to use no more than three for the sake of readability. Another examples is presented where labels are added to the data frame and where some common options are adapted

attr(tbl2$sex,"label") <- "Gender"
attr(tbl2$day,"label") <- "Day of the week"
ltx_table(tbl2,x=c("sex","day"),y=c("time"),var="FreqPerc",yhead = TRUE,size="\\normalsize",
          title="customer frequency",xabove=TRUE,out="out4.tex",group=1,mancol="lllll",
          template=paste0(system.file(package =  "R3port"), "/listing.tex"))

out4.pdf

With a bit of fantasy you can make combinations like this for instance:

library(plyr)
tbl3           <- freq(tips,c("sex","day","time"),total=c("day","time"),spacechar = "~")
tbl3$statistic <- factor("N (perc)")
tbl3$value     <- tbl3$FreqPerc
tbl3           <- rbind.fill(tbl1,tbl3)
ltx_table(tbl3,x=c("sex","day"),y=c("time","statistic"),var="value",convchar = TRUE,
          title="total bill statistics",xabove=TRUE,out="out5.tex",
          mancol=paste(rep("l",16),collapse=""),
          template=paste0(system.file(package =  "R3port"), "/listing.tex"))

out5.pdf

Graphical output

The graphical output system is basically the same as for the tables and listings. The only difference is that the figures are also saved as png or pdf files. Then they are referenced in the tex or html file, and if selected compiled. Using grid graphics is the easiest because you can just place the plot in an object and pass it to the functions. The way base plots can be used is by placing it in a function. Some examples are given below:

# Used lwidth to ensure correct width in beamer presentations
library(ggplot2)
pl <- ggplot(tips,aes(x=day,y=total_bill)) + geom_boxplot()
ltx_plot(pl,out="out6.tex",titlepr = "plot A",
         title="example for basic plotting",lwidth="0.9\\linewidth")
html_plot(pl,out="out6.html",titlepr = "plot A",
          title="example for basic plotting")

# you can output a list of plots e.g:
pl <- lapply(unique(tips$sex),function(x){
  ggplot(tips[tips$sex==x,],aes(time,total_bill)) + geom_boxplot() +
    facet_wrap(~day) + ggtitle(x)
})
ltx_plot(pl,out="out7.tex",titlepr = "plot B",
         title="example for plotting lists",lwidth="0.9\\linewidth")
html_plot(pl,out="out7.html",titlepr = "plot B",
          title="example for plotting lists")

# base plots can be used but placed in function:
bpl <- function() plot(tips$day,tips$total_bill)
ltx_plot(bpl(),out="out8.tex",titlepr = "plot C",
         title="example for base plot",lwidth="0.9\\linewidth")
html_plot(bpl(),out="out8.html",titlepr = "plot C",
          title="example for base plot")

out6.pdf
out6.html
out7.pdf
out7.html
out8.pdf
out8.html

Putting it together

The last thing to after creating the tables listings and plots is to combine it in an overall document. Here the last two functions will come in ltx_combine and html_combine. To have a bit of background on how these functions work we should first look at all the output that is created. For each table and listing, by default 3 files are generated. For latex output, the tex file, compiled pdf and a raw tex file. For html only a html and raw html file. In case of plotting also a figures folder is created with teh plots. The raw files have only the text/coding for the table or listing. The combine functions can pick these files up and place it in a combined document. The combine argument can be used to select files, for instance if you want to combine a selected set of output.

ltx_combine(out="comb1.tex",template=paste0(system.file(package="R3port"),"/default.tex"))
html_combine(out="comb1.html",toctheme=TRUE,
             template=paste0(system.file(package="R3port"),"/bootstrap.html"))

comb1.pdf
comb1.html

The templates

You probably noticed that not all output generated has the same layout. This is controlled by the templates, I didn’t explain the template argument before because I think it deserves a section of it’s own. The template system uses whisker to create output in different styes. A couple of templates are included within the package to start with, however users can generate their own templates using this system. The whisker package is set up to provide a template and a list with variables to render (called rendlist in this package). Provide a template and a rendlist to create a custom styled output. The included templates are demonstrated below with the combine functions (but will work the same for the list, table and plot functions). But if you want to experiment read further for some details.

tmpl  <- list.files(system.file(package="R3port"),pattern="\\.tex$",full.names=TRUE)
lapply(1:length(tmpl),function(x){
  ppt <- ifelse(grepl("beamer.tex",tmpl[x]),TRUE,FALSE)
  ltx_combine(out=paste0("combt",x,".tex"),template=tmpl[x],presentation=ppt)
})

comb1.pdf
comb2.pdf
comb3.pdf
comb4.pdf
comb5.pdf

Create your own template

The way the package handles the rendlist is that certain information is always added to this list within a function. This is off course necessary to be able to include the table,list or plot to be created within the final document. Practically this means that the rrres tag is always included in the template to place in the R results to be included. Other special tags include rrtoc, css and orientation. The safest way is to not include these tags in rendlist or change this within the template (or at least be aware of the effect when omitting tags or placing them elsewhere in the template)

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.