The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.
GTFSwizard analyzes scheduled service. Results describe the timetable rather than observed vehicle movements or passenger demand. Pay attention to each function’s aggregation method because it defines the observational unit.
A GTFS service_id identifies one service calendar.
Several IDs can operate on the same date. GTFSwizard assigns the same
service_pattern to dates that have the exact same set of
active services. Consequently, one service_id can belong to
several patterns when the services operating alongside it change.
get_servicepattern(gtfs)
#> # A tibble: 2 × 3
#> service_id service_pattern pattern_frequency
#> <chr> <chr> <int>
#> 1 4 servicepattern-1 614
#> 2 <NA> No service 116pattern_frequency is the number of dates represented by
that exact active service set. The most frequent active pattern is
therefore a useful default typical day, but it is not necessarily a
weekday and should be interpreted from the feed calendar.
Frequency counts scheduled departures. Headway measures elapsed
minutes between successive service instances in a comparable group.
Route-level results retain direction_id when it is
available.
head(get_frequency(gtfs, method = "by_route"))
#> # A tibble: 6 × 5
#> route_id direction_id service_pattern pattern_frequency daily.frequency
#> <chr> <int> <chr> <int> <int>
#> 1 6 0 servicepattern-1 614 63
#> 2 6 1 servicepattern-1 614 64
#> 3 7 0 servicepattern-1 614 15
#> 4 7 1 servicepattern-1 614 15
#> 5 8 0 servicepattern-1 614 29
#> 6 8 1 servicepattern-1 614 29
head(get_headways(gtfs, method = "by_route"))
#> # A tibble: 6 × 6
#> route_id direction_id service_pattern pattern_frequency headway_minutes
#> <chr> <int> <chr> <int> <dbl>
#> 1 6 0 servicepattern-1 614 17.0
#> 2 6 1 servicepattern-1 614 16.8
#> 3 7 0 servicepattern-1 614 62.1
#> 4 7 1 servicepattern-1 614 62.1
#> 5 8 0 servicepattern-1 614 37
#> 6 8 1 servicepattern-1 614 37
#> # ℹ 1 more variable: valid_trips <int>Common method names use underscores:
by_trip returns one observation per trip;by_route aggregates by route, direction, and service
pattern where applicable;by_hour aggregates scheduled service by hour;detailed returns stop-call or interval-level
observations.Check a function’s help page because not every method is meaningful for every indicator.
Duration and distance are schedule and geometry properties. Speed combines them, dwell time is departure minus arrival at a stop call, and fleet counts simultaneously active scheduled trip instances.
head(get_durations(gtfs, method = "by_trip"))
#> # A tibble: 6 × 6
#> route_id trip_id direction_id duration service_pattern pattern_frequency
#> <chr> <chr> <int> <dbl> <chr> <int>
#> 1 7 10 0 2400 servicepattern-1 614
#> 2 6 100 1 2160 servicepattern-1 614
#> 3 6 101 1 2160 servicepattern-1 614
#> 4 6 102 1 2160 servicepattern-1 614
#> 5 6 103 1 2160 servicepattern-1 614
#> 6 6 104 1 2160 servicepattern-1 614
head(get_distances(gtfs, method = "by_trip"))
#> # A tibble: 6 × 6
#> route_id trip_id direction_id distance service_pattern pattern_frequency
#> <chr> <chr> <int> <dbl> <chr> <int>
#> 1 7 4 0 17579. servicepattern-1 614
#> 2 7 5 0 17579. servicepattern-1 614
#> 3 7 6 0 17579. servicepattern-1 614
#> 4 7 7 0 17579. servicepattern-1 614
#> 5 7 8 0 17579. servicepattern-1 614
#> 6 7 9 0 17579. servicepattern-1 614
head(get_speeds(gtfs, method = "by_route"))
#> # A tibble: 6 × 6
#> route_id direction_id trips average.speed service_pattern pattern_frequency
#> <chr> <int> <int> <dbl> <chr> <int>
#> 1 6 0 63 38.4 servicepattern-1 614
#> 2 6 1 64 38.4 servicepattern-1 614
#> 3 7 0 15 26.4 servicepattern-1 614
#> 4 7 1 15 25.7 servicepattern-1 614
#> 5 8 0 29 21.9 servicepattern-1 614
#> 6 8 1 29 21.9 servicepattern-1 614
head(get_dwelltimes(gtfs, method = "by_route"))
#> # A tibble: 6 × 6
#> route_id direction_id trips average.dwelltime service_pattern
#> <chr> <int> <int> <dbl> <chr>
#> 1 6 0 1260 0 servicepattern-1
#> 2 6 1 1280 0 servicepattern-1
#> 3 7 0 150 0 servicepattern-1
#> 4 7 1 150 0 servicepattern-1
#> 5 8 0 290 0 servicepattern-1
#> 6 8 1 290 0 servicepattern-1
#> # ℹ 1 more variable: pattern_frequency <int>
get_fleet(gtfs, method = "peak")
#> # A tibble: 3 × 4
#> service_pattern pattern_frequency hour fleet
#> <chr> <int> <dbl> <int>
#> 1 servicepattern-1 614 18 10
#> 2 servicepattern-1 614 6 9
#> 3 servicepattern-1 614 7 9These are scheduled indicators. They do not estimate congestion, reliability, vehicle availability, layover policy, deadheading, or passenger loads unless those effects are already represented in the feed.
faster <- edit_speed(gtfs, factor = 1.1)
compare_scenarios(gtfs, faster, dates = "2021-12-13", by = "network")
#> # A tibble: 6 × 6
#> metric unit baseline scenario change percent_change
#> <chr> <chr> <dbl> <dbl> <dbl> <dbl>
#> 1 departures trips 215 215 0 0
#> 2 vehicle_hours hours 129. 118. -11.7 -9.06
#> 3 vehicle_km km 4175. 4175. 0 0
#> 4 service_span hours 18.3 18.3 -0.0544 -0.297
#> 5 mean_headway minutes 28.3 28.3 0 0
#> 6 active_fleet vehicles 10 10 0 0Vehicle-hours include intermediate dwell. Active fleet counts
simultaneous trips. For a route comparison, both feeds should use the
same route IDs. Use distance_method = "straight" for direct
stop-to-stop distances in metres, or "shapes" for distance
along the served portion of each shape. Inferred shapes connect
consecutive stops and express their measures in metres.
head(tidy_raptor(gtfs, dates = "2021-12-13", stop_ids = "66",
min_departure = "06:20:00", max_arrival = "09:40:00",
keep = "shortest"))
#> # A tibble: 6 × 6
#> from_stop_id to_stop_id travel_time departure_time arrival_time transfers
#> <chr> <chr> <dbl> <chr> <chr> <int>
#> 1 66 66 0 06:20:00 06:20:00 0
#> 2 66 67 240 06:34:00 06:38:00 0
#> 3 66 65 240 06:51:00 06:55:00 0
#> 4 66 68 420 06:34:00 06:41:00 0
#> 5 66 64 420 06:51:00 06:58:00 0
#> 6 66 63 660 06:51:00 07:02:00 0Routing prepares the selected service date and time window
internally. Frequency entries with exact_times = 0
contribute nominal departures.
The spatial helpers return standard sf objects. Inferred
shapes and corridor segments connect coordinates with straight lines;
they are not map-matched paths.
stops <- get_stops_sf(gtfs$stops)
shapes <- get_shapes_sf(gtfs$shapes)
nrow(stops)
#> [1] 39
nrow(shapes)
#> [1] 6Hubs summarize stops by their scheduled trip and route connections. Corridors join frequently served consecutive stop pairs and report length in meters.
head(get_hubs(gtfs))
#> Simple feature collection with 6 features and 5 fields
#> Geometry type: POINT
#> Dimension: XY
#> Bounding box: xmin: -38.62687 ymin: -3.895013 xmax: -38.56387 ymax: -3.775791
#> Geodetic CRS: WGS 84
#> # A tibble: 6 × 6
#> stop_id trip_id route_id n_trip n_routes geometry
#> <chr> <list> <list> <int> <int> <POINT [°]>
#> 1 28 <chr [185]> <chr [2]> 185 2 (-38.56387 -3.775791)
#> 2 27 <chr [127]> <chr [1]> 127 1 (-38.62042 -3.895013)
#> 3 26 <chr [127]> <chr [1]> 127 1 (-38.62687 -3.88752)
#> 4 25 <chr [127]> <chr [1]> 127 1 (-38.62556 -3.877935)
#> 5 24 <chr [127]> <chr [1]> 127 1 (-38.62003 -3.867487)
#> 6 23 <chr [127]> <chr [1]> 127 1 (-38.60866 -3.851034)
get_corridor(gtfs, i = 0.2, min_length = 100)
#> Simple feature collection with 1 feature and 4 fields
#> Geometry type: MULTILINESTRING
#> Dimension: XY
#> Bounding box: xmin: -38.62687 ymin: -3.895013 xmax: -38.53248 ymax: -3.720076
#> Geodetic CRS: WGS 84
#> # A tibble: 1 × 5
#> corridor stop_id trip_id length geometry
#> * <chr> <list> <list> <dbl> <MULTILINESTRING [°]>
#> 1 Corridor 1 <chr [20]> <chr [127]> 22953. ((-38.53248 -3.72603, -38.5349 -3.73…Use plot_hubs() and plot_corridor() for the
corresponding network views. The i argument is a share
threshold, not an absolute number of trips.
plot_calendar() shows active dates, trip counts, or
service patterns.plot_frequency() and plot_headways() show
system service by hour.plot_routefrequency() compares routes with a readable
top_n limit.plot_servicespan() shows first departure and final
arrival.plot_serviceheatmap() compares scheduled departures by
weekday and hour.plot_routeduration() compares trip-duration
distributions.plot_servicesupply() compares scheduled
vehicle-hours.All plotting functions return ggplot objects, so labels
and themes can be extended with ggplot2 when needed.
These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.