Ever used an R function that produced a not-very-helpful error message, just to discover after minutes of debugging that you simply passed a wrong argument?
Blaming the laziness of the package author for not doing such standard checks (in a dynamically typed language such as R) is at least partially unfair, as R makes theses types of checks cumbersome and annoying. Well, that’s how it was in the past.
Enter checkmate.
Virtually every standard type of user error when passing arguments into function can be caught with a simple, readable line which produces an informative error message in case. A substantial part of the package was written in C to minimize any worries about execution time overhead.
Intro
As a motivational example, consider you have a function to calculate the faculty of a natural number and the user may choose between using either the stirling approximation or R’s factorial function (which internally uses the gamma function). Thus, you have two arguments, n and method. Argument n must obviously be a positive natural number and method must be either "stirling" or "factorial". Here is a version of all the hoops you need to jump through to ensure that these simple requirements are met:
fact <- function(n, method = "stirling") {
if (length(n) != 1)
stop("Argument 'n' must have length 1")
if (!is.numeric(n))
stop("Argument 'n' must be numeric")
if (is.na(n))
stop("Argument 'n' may not be NA")
if (is.double(n)) {
if (is.nan(n))
stop("Argument 'n' may not be NaN")
if (is.infinite(n))
stop("Argument 'n' must be finite")
if (abs(n - round(n, 0)) > sqrt(.Machine$double.eps))
stop("Argument 'n' must be an integerish value")
n <- as.integer(n)
}
if (n < 0)
stop("Argument 'n' must be >= 0")
if (length(method) != 1)
stop("Argument 'method' must have length 1")
if (!is.character(method) || !method %in% c("stirling", "factorial"))
stop("Argument 'method' must be either 'stirling' or 'factorial'")
if (method == "factorial")
factorial(n)
else
sqrt(2 * pi * n) * (n / exp(1))^n
}
And for comparison, here is the same function using checkmate:
fact <- function(n, method = "stirling") {
assertCount(n)
assertChoice(method, c("stirling", "factorial"))
if (method == "factorial")
factorial(n)
else
sqrt(2 * pi * n) * (n / exp(1))^n
}
Function overview
The functions can be split into four functional groups, indicated by their prefix.
If prefixed with assert, an error is thrown if the corresponding check fails. Otherwise, the checked object is returned invisibly. There are many different coding styles out there in the wild, but most R programmers stick to either CamelCase or underscore_case. Therefore, checkmate offers all assert functions in both flavors: assert_count is just an alias for assertCount but allows you to retain your favorite style.
The family of functions prefixed with test always return the check result as logical value. Again, you can use test_count and testCount interchangeably.
Functions starting with check return the error message as a string (or TRUE otherwise) and can be used if you need more control and, e.g., want to grep on the returned error message. Note that this is a feature only very few advanced users need and checkmate currently only provides a CamelCase variant.
expect is the last family of functions and is intended to be used with the testthat package. All performed checks are logged into the testthat reporter. Because testthat uses the underscore_case, the extension functions only come in this flavor.
Matrices, Arrays and Data Frame
In case you miss flexibility
You can use assert to perform multiple checks at once and throw an assertion if all checks fail.
Argument Checks for the Lazy
The following functions allow a special syntax to define argument checks using a special format specification. E.g., qassert(x, "I+") asserts that x is an integer vector with at least one element and no missing values. This very simple domain specific language covers a large variety of frequent argument checks with only a few keystrokes. You choose what you like best.
checkmate as testthat extension
To extend testthat, you need to IMPORT, DEPEND or SUGGEST on the checkmate package. Here is a minimal example:
# file: tests/test-all.R
library(testthat)
library(checkmate) # for testthat extensions
test_check("mypkg")
Now you are all set and can use more than 30 new expectations in your tests.
test_that("checkmate is a sweet extension for testthat", {
x = runif(100)
expect_numeric(x, len = 100, any.missing = FALSE, lower = 0, upper = 1)
# or, equivalent, using the lazy style:
qexpect(x, "N100[0,1]")
})
Speed considerations
In comparison with tediously writing the checks yourself in R (c.f. factorial example at the beginning of the vignette), R is sometimes a tad faster while performing checks on scalars. This seems odd at first, because checkmate is mostly written in C and should be comparably fast. Yet many of the functions in the base package are not regular functions, but primitives. While primitives jump directly into the C code, checkmate has to use the considerably slower .Call interface. As a result, it is possible to write (very simple) checks using only the base functions which, under some circumstances, slightly outperform checkmate. However, if you go one step further and wrap the custom check into a function to convenient re-use it, the performance gain is often lost (see benchmark 1).
For larger objects the tide has turned because checkmate avoids many unnecessary intermediate variables. Also note that the quick/lazy implementation in qassert/qtest/qexpect is often a tad faster because only two arguments have to be evaluated (the object and the rule) to determine the set of checks to perform.
Below you find some (probably unrepresentative) benchmark. But also note that this one here has been executed from inside knitr which is often the cause for outliers in the measured execution time. Better run the benchmark yourself to get unbiased results.
Benchmark 1: Assert that x is a flag
library(ggplot2)
library(microbenchmark)
x = TRUE
r = function(x, na.ok = FALSE) { stopifnot(is.logical(x), length(x) == 1, na.ok || !is.na(x)) }
cm = function(x) assertFlag(x)
cmq = function(x) qassert(x, "B1")
mb = microbenchmark(r(x), cm(x), cmq(x))
print(mb)
## Unit: microseconds
## expr min lq mean median uq max neval cld
## r(x) 6.010 6.4875 8.27232 6.8520 7.4605 48.042 100 b
## cm(x) 1.621 1.8205 3.90221 2.0260 2.2630 167.822 100 a
## cmq(x) 1.243 1.4185 2.24834 1.5575 1.7190 37.152 100 a
Benchmark 2: Assert that x is a numeric of length 1000 with no missing nor NaN values
x = runif(1000)
r = function(x) stopifnot(is.numeric(x) && length(x) == 1000 && all(!is.na(x) & x >= 0 & x <= 1))
cm = function(x) assertNumeric(x, len = 1000, any.missing = FALSE, lower = 0, upper = 1)
cmq = function(x) qassert(x, "N1000[0,1]")
mb = microbenchmark(r(x), cm(x), cmq(x))
print(mb)
## Unit: microseconds
## expr min lq mean median uq max neval cld
## r(x) 62.098 64.1240 72.91456 66.5810 70.6930 260.929 100 b
## cm(x) 11.469 12.2450 15.77578 12.6455 13.5860 99.880 100 a
## cmq(x) 11.770 12.3385 13.98622 12.7940 13.9175 39.155 100 a
Benchmark 3: Assert that x is a character vector with no missing values nor empty strings
x = sample(letters, 10000, replace = TRUE)
r = function(x) stopifnot(is.character(x) && !any(is.na(x)) && all(nchar(x) > 0))
cm = function(x) assertCharacter(x, any.missing = FALSE, min.chars = 1)
cmq = function(x) qassert(x, "S+[1,]")
mb = microbenchmark(r(x), cm(x), cmq(x))
print(mb)
## Unit: microseconds
## expr min lq mean median uq max neval
## r(x) 1215.928 1263.3635 1429.68667 1344.447 1490.4930 3283.481 100
## cm(x) 29.594 31.8985 41.72929 35.635 42.9515 246.469 100
## cmq(x) 41.059 42.4690 52.05016 47.209 55.7385 145.089 100
## cld
## b
## a
## a
Benchmark 4: Assert that x is a data frame with no missing values
N = 10000
x = data.frame(a = runif(N), b = sample(letters[1:5], N, replace = TRUE), c = sample(c(FALSE, TRUE), N, replace = TRUE))
r = function(x) is.data.frame(x) && !any(sapply(x, function(x) any(is.na(x))))
cm = function(x) testDataFrame(x, any.missing = FALSE)
cmq = function(x) qtest(x, "D")
mb = microbenchmark(r(x), cm(x), cmq(x))
print(mb)
## Unit: microseconds
## expr min lq mean median uq max neval cld
## r(x) 77.074 87.4195 115.75232 95.687 108.8465 1789.196 100 b
## cm(x) 31.839 33.9760 38.28938 35.161 37.3815 249.912 100 a
## cmq(x) 27.801 29.3450 31.02538 29.881 31.7265 72.637 100 a
# checkmate tries to stop as early as possible
x$a[1] = NA
mb = microbenchmark(r(x), cm(x), cmq(x))
print(mb)
## Unit: nanoseconds
## expr min lq mean median uq max neval cld
## r(x) 97274 112087.5 136476.72 115378.0 117570.0 2153785 100 b
## cm(x) 4325 4865.0 6857.36 5681.0 6168.5 57353 100 a
## cmq(x) 756 975.0 1480.33 1224.5 1542.5 18745 100 a
Calling checkmate from C/C++
The package registers two functions which can be used in other packages’ C/C++ code for argument checks.
SEXP qassert(SEXP x, const char *rule, const char *name);
Rboolean qtest(SEXP x, const char *rule);
These are the counterparts to qassert and qtest. Due to their simplistic interface, they perfectly suit the requirements of most type checks in C/C++.
For detailed background information on the register mechanism, see the Exporting C Code section in Hadley’s Book “R Packages” or WRE. Here is a step-by-step guide to get you started:
- Add
checkmate to your “Imports” and LinkingTo" sections in your DESCRIPTION file.
- Include the provided header file
checkmate.h. Unfortunately, the include is a bit tedious at the moment and you have to make sure to include the header only once. To work around this issue, write your own header file “include_checkmate.h” (see below for an example).
- In every file you want to use
qtest or qassert, include checkmate.h or include_checkmate.h, respectively.
/* Examplary header file as workaround for (2) */
#ifndef INCLUDE_CHECKMATE_H_
#define INCLUDE_CHECKMATE_H_
#include <checkmate.h>
#endif
#include "include_checkmate.h"
/* alternative: #include <checkmate.h> */
SEXP double(SEXP x) {
/* x must be a numeric, not NA and must have length 1 */
qassert(x, "N1");
num = REAL(x)[0];
return ScalarReal(num * num);
}
Session Info
For the sake of completeness, here the sessionInfo() for the benchmark (but remember the note before on knitr possibly biasing the results).
## R version 3.2.3 (2015-12-10)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Arch Linux
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=de_DE.UTF-8 LC_COLLATE=C
## [5] LC_MONETARY=de_DE.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=de_DE.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=de_DE.UTF-8 LC_IDENTIFICATION=C
##
## attached base packages:
## [1] methods stats graphics grDevices utils datasets base
##
## other attached packages:
## [1] microbenchmark_1.4-2.1 ggplot2_2.0.0 checkmate_1.7.1
## [4] rt_0.1
##
## loaded via a namespace (and not attached):
## [1] Rcpp_0.12.3 knitr_1.12.3 magrittr_1.5 MASS_7.3-45
## [5] splines_3.2.3 devtools_1.10.0 munsell_0.4.2 docopt_0.4.3.3
## [9] lattice_0.20-33 colorspace_1.2-6 multcomp_1.4-2 stringr_1.0.0
## [13] plyr_1.8.3 tools_3.2.3 grid_3.2.3 data.table_1.9.6
## [17] gtable_0.1.2 TH.data_1.0-7 htmltools_0.3 survival_2.38-3
## [21] yaml_2.1.13 digest_0.6.9 crayon_1.3.1 formatR_1.2.1
## [25] codetools_0.2-14 memoise_1.0.0 evaluate_0.8 rmarkdown_0.9.2
## [29] sandwich_2.3-4 stringi_1.0-1 scales_0.3.0 mvtnorm_1.0-4
## [33] chron_2.3-47 zoo_1.7-12