The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.

Life Data Analysis Part I - Estimation of Failure Probabilities

A Non-parametric Approach

Tim-Gunnar Hensel

David Barkemeyer

2023-04-04

This document presents non-parametric estimation methods for the computation of failure probabilities of complete data (failures) taking (multiple) right-censored units into account. A unit can be either a single component, an assembly or an entire system.

Furthermore, the estimation results are presented in distribution-specific probability plots.

Introduction to Life Data Analysis

If the lifetime (or any other damage-equivalent quantity such as distance or load cycles) of a unit is considered to be a continuous random variable T, then the probability that a unit has failed at t is defined by its CDF (cumulative distribution function) F(t).

\[ P(T\leq t) = F(t) \]

In order to obtain an estimate of the CDF for each observation \(t_1, t_2, ..., t_n\) two approaches are possible. Using a parametric lifetime distribution requires that the underlying assumptions for the sample data are valid. If the distribution-specific assumptions are correct, the model parameters can be estimated and the CDF is computable. But if assumptions are not held, interpretations and derived conclusions are not reliable.

A more general approach for the calculation of cumulative failure probabilities is to use non-parametric statistical estimators \(\hat{F}(t_1), \hat{F}(t_2), ..., \hat{F}(t_n)\). In comparison to a parametric distribution no general assumptions must be held. For non-parametric estimators, an ordered sample of size \(n\) is needed. Starting at \(1\), the ranks \(i \in \{1, 2, ..., n \}\) are assigned to the ascending sorted sample values. Since there is a known relationship between ranks and corresponding ranking probabilities a CDF can be determined.

But rank distributions are systematically skewed distributions and thus the median value instead of the expected value \(E\left[F\left(t_i\right)\right] = \frac{i}{n + 1}\) is used for the estimation 1. This skewness is visualized in Figure 1.

library(dplyr) # data manipulation 
library(ggplot2) # visualization

x <- seq(0, 1, length.out = 100) # CDF
n <- 10 # sample size
i <- c(1, 3, 5, 7, 9) # ranks
r <- n - i + 1 # inverse ranking

df_dens <- expand.grid(cdf = x, i = i) %>% 
  mutate(n = n, r = n - i + 1, pdf = dbeta(x = x, shape1 = i, shape2 = r))

densplot <- ggplot(data = df_dens, aes(x = cdf, y = pdf, colour = as.factor(i))) + 
  geom_line() + 
  scale_colour_discrete(guide = guide_legend(title = "i")) + 
  theme_bw() + 
  labs(x = "Failure Probability", y = "Density")
densplot

Figure 1: Densities for different ranks i in samples of size n = 10.

Failure Probability Estimation

In practice, a simplification for the calculation of the median value, also called median rank, is made. The formula of Benard’s approximation is given by

\[\hat{F}(t_i) \approx \frac{i - 0,3}{n + 0,4} \]

and is described in The Plotting of Observations on Probability Paper 2.

However, this equation only provides valid estimates for failure probabilities if all units in the sample are defectives (estimate_cdf(methods = "mr", ...)).

In field data analysis, however, the sample mainly consists of intact units and only a small fraction of units failed. Units that have no damage at the point of analysis and also have not reached the operating time or mileage of units that have already failed, are potential candidates for future failures. As these, for example, still are likely to fail during a specific time span, like the guarantee period, the CDF must be adjusted upwards by these potential candidates.

A commonly used method for correcting probabilities of (multiple) right-censored data is Johnson’s method (estimate_cdf(methods = "johnson", ...)). By this method, all units that are included in the period looked at are sorted in an ascending order of their operating time (or any other damage-equivalent quantity). If there are units that have not failed before the i-th failure, an adjusted rank for the i-th failure is formed. This correction takes the potential candidates into account and increases the rank number. In consequence, a higher rank leads to a higher failure probability. This can be seen in Figure 1.

The rank adjustment is determined with:

\[j_i = j_{i-1} + x_i \cdot I_i, \;\; with \;\; j_0 = 0\]

Here, \(j_ {i-1}\) is the adjusted rank of the previous failure, \(x_i\) is the number of defectives at \(t_i\) and \(I_i\) is the increment that corrects the considered rank by the potential candidates.

\[I_i=\frac{(n+1)-j_{i-1}}{1+(n-n_i)}\]

The sample size is \(n\) and \(n_i\) is the number of units that have a lower \(t\) than the i-th unit. Once the adjusted ranks are calculated, the CDF can be estimated according to Benard’s approximation.

Other methods in {weibulltools} that can also handle (multiple) right-censored data are the Kaplan-Meier estimator (estimate_cdf(methods = "kaplan", ...)) and the Nelson-Aalen estimator (estimate_cdf(methods = "nelson", ...)).

Probability Plotting

After computing failure probabilities a method called probability plotting is applicable. It is a graphical goodness of fit technique that is used in assessing whether an assumed distribution is appropriate to model the sample data.

The axes of a probability plot are transformed in such a way that the CDF of a specified model is represented through a straight line. If the plotted points (plot_prob()) lie on an approximately straight line it can be said that the chosen distribution is adequate.

The two-parameter Weibull distribution can be parameterized with parameters \(\mu\) and \(\sigma\) such that the CDF is characterized by the following equation:

\[F(t)=\Phi_{SEV}\left(\frac{\log(t) - \mu}{\sigma}\right)\]

The advantage of this representation is that the Weibull is part of the (log-)location-scale family. A linearized representation of this CDF is:

\[\Phi^{-1}_{SEV}\left[F(t)\right]=\frac{1}{\sigma} \cdot \log(t) - \frac{\mu}{\sigma}\]

This leads to the following transformations regarding the axes:

Another version of the Weibull CDF with parameters \(\eta\) and \(\beta\) results in a CDF that is defined by the following equation:

\[F(t)=1-\exp\left[ -\left(\frac{t}{\eta}\right)^{\beta}\right]\]

Then a linearized version of the CDF is:

\[ \log\left\{-\log\left[1-F(t)\right]\right\} = \beta \cdot \log(t) - \beta \cdot \log(\eta)\]

Transformations regarding the axes are:

It can be easily seen that the parameters can be converted into each other. The corresponding equations are:

\[\beta = \frac{1}{\sigma}\]

and

\[\eta = \exp\left(\mu\right).\]

Data: Shock Absorber

To apply the introduced methods of non-parametric failure probability estimation and probability plotting the shock data is used. In this dataset kilometer-dependent problems that have occurred on shock absorbers are reported. In addition to failed items the dataset also contains non-defectives (censored) observations. The data can be found in Statistical Methods for Reliability Data 3.

For consistent handling of the data, {weibulltools} introduces the function reliability_data() that converts the original dataset into a wt_reliability_data object. This formatted object allows to easily apply the presented methods.

shock_tbl <- reliability_data(data = shock, x = distance, status = status)
shock_tbl
#> Reliability Data with characteristic x: 'distance':
#> # A tibble: 38 × 3
#>        x status id   
#>    <int>  <dbl> <chr>
#>  1  6700      1 ID1  
#>  2  6950      0 ID2  
#>  3  7820      0 ID3  
#>  4  8790      0 ID4  
#>  5  9120      1 ID5  
#>  6  9660      0 ID6  
#>  7  9820      0 ID7  
#>  8 11310      0 ID8  
#>  9 11690      0 ID9  
#> 10 11850      0 ID10 
#> # ℹ 28 more rows

Estimation of Failure Probabilities with {weibulltools}

First, we are interested in how censored observations influence the estimation of failure probabilities in comparison to the case where only failed units are considered. To deal with survived and failed units we will use estimate_cdf() with methods = "johnson", whereas methods = "mr" only considers failures.

# Estimate CDF with both methods: 
cdf_tbl <- estimate_cdf(shock_tbl, methods = c("mr", "johnson"))
#> The 'mr' method only considers failed units (status == 1) and does not retain intact units (status == 0).

# First case where only failed units are taken into account:
cdf_tbl_mr <- cdf_tbl %>% filter(cdf_estimation_method == "mr")
cdf_tbl_mr
#> CDF estimation for method 'mr':
#> # A tibble: 11 × 6
#>    id        x status  rank   prob cdf_estimation_method
#>    <chr> <int>  <dbl> <dbl>  <dbl> <chr>                
#>  1 ID1    6700      1     1 0.0614 mr                   
#>  2 ID5    9120      1     2 0.149  mr                   
#>  3 ID13  12200      1     3 0.237  mr                   
#>  4 ID15  13150      1     4 0.325  mr                   
#>  5 ID19  14300      1     5 0.412  mr                   
#>  6 ID20  17520      1     6 0.5    mr                   
#>  7 ID27  20100      1     7 0.588  mr                   
#>  8 ID31  20900      1     8 0.675  mr                   
#>  9 ID32  22700      1     9 0.763  mr                   
#> 10 ID34  26510      1    10 0.851  mr                   
#> 11 ID36  27490      1    11 0.939  mr

# Second case where both, survived and failed units are considered:
cdf_tbl_john <- cdf_tbl %>% filter(cdf_estimation_method == "johnson") 
cdf_tbl_john
#> CDF estimation for method 'johnson':
#> # A tibble: 38 × 6
#>    id        x status  rank    prob cdf_estimation_method
#>    <chr> <int>  <dbl> <dbl>   <dbl> <chr>                
#>  1 ID1    6700      1  1     0.0182 johnson              
#>  2 ID2    6950      0 NA    NA      johnson              
#>  3 ID3    7820      0 NA    NA      johnson              
#>  4 ID4    8790      0 NA    NA      johnson              
#>  5 ID5    9120      1  2.09  0.0465 johnson              
#>  6 ID6    9660      0 NA    NA      johnson              
#>  7 ID7    9820      0 NA    NA      johnson              
#>  8 ID8   11310      0 NA    NA      johnson              
#>  9 ID9   11690      0 NA    NA      johnson              
#> 10 ID10  11850      0 NA    NA      johnson              
#> # ℹ 28 more rows


If we compare both outputs we can see that survivors reduce the probabilities. But this is just that what was expected since undamaged units with longer or equal lifetime characteristic x let us gain confidence in the product.

Probability Plotting with {weibulltools}

The estimated probabilities should now be presented in a probability plot. With plot_prob() probability plots for several lifetime distributions can be constructed and estimates of multiple methods can be displayed at once.

Weibull Probability Plot

# Weibull grid for estimated probabilities: 
weibull_grid <- plot_prob(
  cdf_tbl,
  distribution = "weibull", 
  title_main = "Weibull Probability Plot", 
  title_x = "Mileage in km", 
  title_y = "Probability of Failure in %",
  title_trace = "Method",
  plot_method = "ggplot2"
)

weibull_grid

Figure 3: Plotting positions in Weibull grid.


Figure 3 shows that the consideration of survivors (orange points, Method: johnson) decreases the failure probability in comparison to the sole evaluation of failed items (green points, Method: mr).

Log-normal Probability Plot

Finally, we want to use a log-normal probability plot to visualize the estimated failure probabilities.

# Log-normal grid for estimated probabilities: 
lognorm_grid <- plot_prob(
  cdf_tbl,
  distribution = "lognormal",
  title_main = "Log-normal Probability Plot",
  title_x = "Mileage in km",
  title_y = "Probability of Failure in %",
  title_trace = "Method",
  plot_method = "ggplot2"
)

lognorm_grid

Figure 4: Plotting positions in log-normal grid.


On the basis of Figure 3 and Figure 4 we can subjectively assess the goodness of fit of Weibull and log-normal. It can be seen that in both grids, the plotted points roughly fall on a straight line. Hence one can say that the Weibull as well as the log-normal are good model candidates for the shock data.


  1. Kapur, K. C.; Lamberson, L. R.: Reliability in Engineering Design, New York: Wiley, 1977, pp. 297-301↩︎

  2. Benard, A.; Bos-Levenbach, E. C.: The Plotting of Observations on Probability Paper, Statistica Neerlandica 7 (3), 1953, pp. 163-173↩︎

  3. Meeker, W. Q.; Escobar, L. A.: Statistical Methods for Reliability Data, New York, Wiley series in probability and statistics, 1998, p. 630↩︎

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.