The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.

Getting to Know infer

Introduction

infer implements an expressive grammar to perform statistical inference that coheres with the tidyverse design framework. Rather than providing methods for specific statistical tests, this package consolidates the principles that are shared among common hypothesis tests into a set of 4 main verbs (functions), supplemented with many utilities to visualize and extract value from their outputs.

Regardless of which hypothesis test we’re using, we’re still asking the same kind of question: is the effect/difference in our observed data real, or due to chance? To answer this question, we start by assuming that the observed data came from some world where “nothing is going on” (i.e. the observed effect was simply due to random chance), and call this assumption our null hypothesis. (In reality, we might not believe in the null hypothesis at all—the null hypothesis is in opposition to the alternate hypothesis, which supposes that the effect present in the observed data is actually due to the fact that “something is going on.”) We then calculate a test statistic from our data that describes the observed effect. We can use this test statistic to calculate a p-value, giving the probability that our observed data could come about if the null hypothesis was true. If this probability is below some pre-defined significance level \(\alpha\), then we can reject our null hypothesis.

The workflow of this package is designed around this idea. Starting out with some dataset,

Throughout this vignette, we make use of gss, a dataset supplied by infer containing a sample of 500 observations of 11 variables from the General Social Survey.

# load in the dataset
data(gss)

# take a look at its structure
dplyr::glimpse(gss)
## Rows: 500
## Columns: 11
## $ year    <dbl> 2014, 1994, 1998, 1996, 1994, 1996, 1990, 2016, 2000, 1998, 20…
## $ age     <dbl> 36, 34, 24, 42, 31, 32, 48, 36, 30, 33, 21, 30, 38, 49, 25, 56…
## $ sex     <fct> male, female, male, male, male, female, female, female, female…
## $ college <fct> degree, no degree, degree, no degree, degree, no degree, no de…
## $ partyid <fct> ind, rep, ind, ind, rep, rep, dem, ind, rep, dem, dem, ind, de…
## $ hompop  <dbl> 3, 4, 1, 4, 2, 4, 2, 1, 5, 2, 4, 3, 4, 4, 2, 2, 3, 2, 1, 2, 5,…
## $ hours   <dbl> 50, 31, 40, 40, 40, 53, 32, 20, 40, 40, 23, 52, 38, 72, 48, 40…
## $ income  <ord> $25000 or more, $20000 - 24999, $25000 or more, $25000 or more…
## $ class   <fct> middle class, working class, working class, working class, mid…
## $ finrela <fct> below average, below average, below average, above average, ab…
## $ weight  <dbl> 0.8960, 1.0825, 0.5501, 1.0864, 1.0825, 1.0864, 1.0627, 0.4785…

Each row is an individual survey response, containing some basic demographic information on the respondent as well as some additional variables. See ?gss for more information on the variables included and their source. Note that this data (and our examples on it) are for demonstration purposes only, and will not necessarily provide accurate estimates unless weighted properly. For these examples, let’s suppose that this dataset is a representative sample of a population we want to learn about: American adults.

specify(): Specifying Response (and Explanatory) Variables

The specify function can be used to specify which of the variables in the dataset you’re interested in. If you’re only interested in, say, the age of the respondents, you might write:

gss %>%
  specify(response = age)
## Response: age (numeric)
## # A tibble: 500 × 1
##      age
##    <dbl>
##  1    36
##  2    34
##  3    24
##  4    42
##  5    31
##  6    32
##  7    48
##  8    36
##  9    30
## 10    33
## # ℹ 490 more rows

On the front-end, the output of specify just looks like it selects off the columns in the dataframe that you’ve specified. Checking the class of this object, though:

gss %>%
  specify(response = age) %>%
  class()
## [1] "infer"      "tbl_df"     "tbl"        "data.frame"

We can see that the infer class has been appended on top of the dataframe classes–this new class stores some extra metadata.

If you’re interested in two variables–age and partyid, for example–you can specify their relationship in one of two (equivalent) ways:

# as a formula
gss %>%
  specify(age ~ partyid)
## Response: age (numeric)
## Explanatory: partyid (factor)
## # A tibble: 500 × 2
##      age partyid
##    <dbl> <fct>  
##  1    36 ind    
##  2    34 rep    
##  3    24 ind    
##  4    42 ind    
##  5    31 rep    
##  6    32 rep    
##  7    48 dem    
##  8    36 ind    
##  9    30 rep    
## 10    33 dem    
## # ℹ 490 more rows
# with the named arguments
gss %>%
  specify(response = age, explanatory = partyid)
## Response: age (numeric)
## Explanatory: partyid (factor)
## # A tibble: 500 × 2
##      age partyid
##    <dbl> <fct>  
##  1    36 ind    
##  2    34 rep    
##  3    24 ind    
##  4    42 ind    
##  5    31 rep    
##  6    32 rep    
##  7    48 dem    
##  8    36 ind    
##  9    30 rep    
## 10    33 dem    
## # ℹ 490 more rows

If you’re doing inference on one proportion or a difference in proportions, you will need to use the success argument to specify which level of your response variable is a success. For instance, if you’re interested in the proportion of the population with a college degree, you might use the following code:

# specifying for inference on proportions
gss %>%
  specify(response = college, success = "degree")
## Response: college (factor)
## # A tibble: 500 × 1
##    college  
##    <fct>    
##  1 degree   
##  2 no degree
##  3 degree   
##  4 no degree
##  5 degree   
##  6 no degree
##  7 no degree
##  8 degree   
##  9 degree   
## 10 no degree
## # ℹ 490 more rows

hypothesize(): Declaring the Null Hypothesis

The next step in the infer pipeline is often to declare a null hypothesis using hypothesize(). The first step is to supply one of “independence” or “point” to the null argument. If your null hypothesis assumes independence between two variables, then this is all you need to supply to hypothesize():

gss %>%
  specify(college ~ partyid, success = "degree") %>%
  hypothesize(null = "independence")
## Response: college (factor)
## Explanatory: partyid (factor)
## Null Hypothesis: independence
## # A tibble: 500 × 2
##    college   partyid
##    <fct>     <fct>  
##  1 degree    ind    
##  2 no degree rep    
##  3 degree    ind    
##  4 no degree ind    
##  5 degree    rep    
##  6 no degree rep    
##  7 no degree dem    
##  8 degree    ind    
##  9 degree    rep    
## 10 no degree dem    
## # ℹ 490 more rows

If you’re doing inference on a point estimate, you will also need to provide one of p (the true proportion of successes, between 0 and 1), mu (the true mean), med (the true median), or sigma (the true standard deviation). For instance, if the null hypothesis is that the mean number of hours worked per week in our population is 40, we would write:

gss %>%
  specify(response = hours) %>%
  hypothesize(null = "point", mu = 40)
## Response: hours (numeric)
## Null Hypothesis: point
## # A tibble: 500 × 1
##    hours
##    <dbl>
##  1    50
##  2    31
##  3    40
##  4    40
##  5    40
##  6    53
##  7    32
##  8    20
##  9    40
## 10    40
## # ℹ 490 more rows

Again, from the front-end, the dataframe outputted from hypothesize() looks almost exactly the same as it did when it came out of specify(), but infer now “knows” your null hypothesis.

generate(): Generating the Null Distribution

Once we’ve asserted our null hypothesis using hypothesize(), we can construct a null distribution based on this hypothesis. We can do this using one of several methods, supplied in the type argument:

Continuing on with our example above, about the average number of hours worked a week, we might write:

set.seed(1)

gss %>%
  specify(response = hours) %>%
  hypothesize(null = "point", mu = 40) %>%
  generate(reps = 1000, type = "bootstrap")
## Response: hours (numeric)
## Null Hypothesis: point
## # A tibble: 500,000 × 2
## # Groups:   replicate [1,000]
##    replicate hours
##        <int> <dbl>
##  1         1 46.6 
##  2         1 43.6 
##  3         1 38.6 
##  4         1 28.6 
##  5         1 38.6 
##  6         1 38.6 
##  7         1  6.62
##  8         1 78.6 
##  9         1 38.6 
## 10         1 38.6 
## # ℹ 499,990 more rows

In the above example, we take 1000 bootstrap samples to form our null distribution.

Note that, before generate()ing, we’ve set the seed for random number generation with the set.seed() function. When using the infer package for research, or in other cases when exact reproducibility is a priority, this is good practice. infer will respect the random seed specified in the set.seed() function, returning the same result when generate()ing data given an identical seed.

To generate a null distribution for the independence of two variables, we could also randomly reshuffle the pairings of explanatory and response variables to break any existing association. For instance, to generate 1000 replicates that can be used to create a null distribution under the assumption that political party affiliation is not affected by age:

gss %>%
  specify(partyid ~ age) %>%
  hypothesize(null = "independence") %>%
  generate(reps = 1000, type = "permute")
## Response: partyid (factor)
## Explanatory: age (numeric)
## Null Hypothesis: independence
## # A tibble: 500,000 × 3
## # Groups:   replicate [1,000]
##    partyid   age replicate
##    <fct>   <dbl>     <int>
##  1 rep        36         1
##  2 rep        34         1
##  3 dem        24         1
##  4 dem        42         1
##  5 dem        31         1
##  6 ind        32         1
##  7 ind        48         1
##  8 rep        36         1
##  9 dem        30         1
## 10 rep        33         1
## # ℹ 499,990 more rows

calculate(): Calculating Summary Statistics

calculate() calculates summary statistics from the output of infer core functions. The function takes in a stat argument, which is currently one of “mean”, “median”, “sum”, “sd”, “prop”, “count”, “diff in means”, “diff in medians”, “diff in props”, “Chisq”, “F”, “t”, “z”, “slope”, or “correlation”. For example, continuing our example above to calculate the null distribution of mean hours worked per week:

gss %>%
  specify(response = hours) %>%
  hypothesize(null = "point", mu = 40) %>%
  generate(reps = 1000, type = "bootstrap") %>%
  calculate(stat = "mean")
## Response: hours (numeric)
## Null Hypothesis: point
## # A tibble: 1,000 × 2
##    replicate  stat
##        <int> <dbl>
##  1         1  39.2
##  2         2  39.1
##  3         3  39.0
##  4         4  39.8
##  5         5  41.4
##  6         6  39.4
##  7         7  39.8
##  8         8  40.4
##  9         9  41.5
## 10        10  40.9
## # ℹ 990 more rows

The output of calculate() here shows us the sample statistic (in this case, the mean) for each of our 1000 replicates. If you’re carrying out inference on differences in means, medians, or proportions, or t and z statistics, you will need to supply an order argument, giving the order in which the explanatory variables should be subtracted. For instance, to find the difference in mean age of those that have a college degree and those that don’t, we might write:

gss %>%
  specify(age ~ college) %>%
  hypothesize(null = "independence") %>%
  generate(reps = 1000, type = "permute") %>%
  calculate("diff in means", order = c("degree", "no degree"))
## Response: age (numeric)
## Explanatory: college (factor)
## Null Hypothesis: independence
## # A tibble: 1,000 × 2
##    replicate   stat
##        <int>  <dbl>
##  1         1 -2.35 
##  2         2 -0.902
##  3         3  0.403
##  4         4 -0.426
##  5         5  0.482
##  6         6 -0.196
##  7         7  1.33 
##  8         8 -1.07 
##  9         9  1.68 
## 10        10  0.888
## # ℹ 990 more rows

Other Utilities

infer also offers several utilities to extract the meaning out of summary statistics and distributions—the package provides functions to visualize where a statistic is relative to a distribution (with visualize()), calculate p-values (with get_p_value()), and calculate confidence intervals (with get_confidence_interval()).

To illustrate, we’ll go back to the example of determining whether the mean number of hours worked per week is 40 hours.

# find the point estimate
obs_mean <- gss %>%
  specify(response = hours) %>%
  calculate(stat = "mean")

# generate a null distribution
null_dist <- gss %>%
  specify(response = hours) %>%
  hypothesize(null = "point", mu = 40) %>%
  generate(reps = 1000, type = "bootstrap") %>%
  calculate(stat = "mean")

Our point estimate 41.382 seems pretty close to 40, but a little bit different. We might wonder if this difference is just due to random chance, or if the mean number of hours worked per week in the population really isn’t 40.

We could initially just visualize the null distribution.

null_dist %>%
  visualize()

Where does our sample’s observed statistic lie on this distribution? We can use the obs_stat argument to specify this.

null_dist %>%
  visualize() +
  shade_p_value(obs_stat = obs_mean, direction = "two-sided")

Notice that infer has also shaded the regions of the null distribution that are as (or more) extreme than our observed statistic. (Also, note that we now use the + operator to apply the shade_p_value function. This is because visualize outputs a plot object from ggplot2 instead of a data frame, and the + operator is needed to add the p-value layer to the plot object.) The red bar looks like it’s slightly far out on the right tail of the null distribution, so observing a sample mean of 41.382 hours would be somewhat unlikely if the mean was actually 40 hours. How unlikely, though?

# get a two-tailed p-value
p_value <- null_dist %>%
  get_p_value(obs_stat = obs_mean, direction = "two-sided")

p_value
## # A tibble: 1 × 1
##   p_value
##     <dbl>
## 1   0.032

It looks like the p-value is 0.032, which is pretty small—if the true mean number of hours worked per week was actually 40, the probability of our sample mean being this far (1.382 hours) from 40 would be 0.032. This may or may not be statistically significantly different, depending on the significance level \(\alpha\) you decided on before you ran this analysis. If you had set \(\alpha = .05\), then this difference would be statistically significant, but if you had set \(\alpha = .01\), then it would not be.

To get a confidence interval around our estimate, we can write:

# generate a distribution like the null distribution, 
# though exclude the null hypothesis from the pipeline
boot_dist <- gss %>%
  specify(response = hours) %>%
  generate(reps = 1000, type = "bootstrap") %>%
  calculate(stat = "mean")

# start with the bootstrap distribution
ci <- boot_dist %>%
  # calculate the confidence interval around the point estimate
  get_confidence_interval(point_estimate = obs_mean,
                          # at the 95% confidence level
                          level = .95,
                          # using the standard error
                          type = "se")

ci
## # A tibble: 1 × 2
##   lower_ci upper_ci
##      <dbl>    <dbl>
## 1     40.1     42.7

As you can see, 40 hours per week is not contained in this interval, which aligns with our previous conclusion that this finding is significant at the confidence level \(\alpha = .05\). To see this interval represented visually, we can use the shade_confidence_interval() utility:

boot_dist %>%
  visualize() +
  shade_confidence_interval(endpoints = ci)

Theoretical Methods

{infer} also provides functionality to use theoretical methods for "Chisq", "F", "t" and "z" distributions.

Generally, to find a null distribution using theory-based methods, use the same code that you would use to find the observed statistic elsewhere, replacing calls to calculate() with assume(). For example, to calculate the observed \(t\) statistic (a standardized mean):

# calculate an observed t statistic
obs_t <- gss %>%
  specify(response = hours) %>%
  hypothesize(null = "point", mu = 40) %>%
  calculate(stat = "t")

Then, to define a theoretical \(t\) distribution, we could write:

# switch out calculate with assume to define a distribution
t_dist <- gss %>%
  specify(response = hours) %>%
  assume(distribution = "t")

From here, the theoretical distribution interfaces in the same way that simulation-based null distributions do. For example, to interface with p-values:

# visualize the theoretical null distribution
visualize(t_dist) +
  shade_p_value(obs_stat = obs_t, direction = "greater")

# more exactly, calculate the p-value
get_p_value(t_dist, obs_t, "greater")
## # A tibble: 1 × 1
##   p_value
##     <dbl>
## 1  0.0188

Confidence intervals lie on the scale of the data rather than on the standardized scale of the theoretical distribution, so be sure to use the unstandardized observed statistic when working with confidence intervals.

# find the theory-based confidence interval
theor_ci <- 
  get_confidence_interval(
    x = t_dist,
    level = .95,
    point_estimate = obs_mean
  )

theor_ci
## # A tibble: 1 × 2
##   lower_ci upper_ci
##      <dbl>    <dbl>
## 1     40.1     42.7

When visualized, the \(t\) distribution will be recentered and rescaled to align with the scale of the observed data.

# visualize the theoretical sampling distribution
visualize(t_dist) +
  shade_confidence_interval(theor_ci)

Multiple regression

To accommodate randomization-based inference with multiple explanatory variables, the package implements an alternative workflow based on model fitting. Rather than calculate()ing statistics from resampled data, this side of the package allows you to fit() linear models on data resampled according to the null hypothesis, supplying model coefficients for each explanatory variable. For the most part, you can just switch out calculate() for fit() in your calculate()-based workflows.

As an example, suppose that we want to fit hours worked per week using the respondent age and college completion status. We could first begin by fitting a linear model to the observed data.

observed_fit <- gss %>%
  specify(hours ~ age + college) %>%
  fit()

Now, to generate null distributions for each of these terms, we can fit 1000 models to resamples of the gss dataset, where the response hours is permuted in each. Note that this code is the same as the above except for the addition of the hypothesize and generate step.

null_fits <- gss %>%
  specify(hours ~ age + college) %>%
  hypothesize(null = "independence") %>%
  generate(reps = 1000, type = "permute") %>%
  fit()

null_fits
## # A tibble: 3,000 × 3
## # Groups:   replicate [1,000]
##    replicate term          estimate
##        <int> <chr>            <dbl>
##  1         1 intercept     40.3    
##  2         1 age            0.0166 
##  3         1 collegedegree  1.20   
##  4         2 intercept     41.3    
##  5         2 age            0.00664
##  6         2 collegedegree -0.407  
##  7         3 intercept     42.9    
##  8         3 age           -0.0371 
##  9         3 collegedegree  0.00431
## 10         4 intercept     42.7    
## # ℹ 2,990 more rows

To permute variables other than the response variable, the variables argument to generate() allows you to choose columns from the data to permute. Note that any derived effects that depend on these columns (e.g., interaction effects) will also be affected.

Beyond this point, observed fits and distributions from null fits interface exactly like analogous outputs from calculate(). For instance, we can use the following code to calculate a 95% confidence interval from these objects.

get_confidence_interval(
  null_fits, 
  point_estimate = observed_fit, 
  level = .95
)
## # A tibble: 3 × 3
##   term          lower_ci upper_ci
##   <chr>            <dbl>    <dbl>
## 1 age            -0.0948   0.0987
## 2 collegedegree  -2.57     2.72  
## 3 intercept      37.4     45.5

Or, we can shade p-values for each of these observed regression coefficients from the observed data.

visualize(null_fits) + 
  shade_p_value(observed_fit, direction = "both")

Conclusion

That’s it! This vignette covers most all of the key functionality of infer. See help(package = "infer") for a full list of functions and vignettes.

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.