The hardware and bandwidth for this mirror is donated by dogado GmbH, the Webhosting and Full Service-Cloud Provider. Check out our Wordpress Tutorial.
If you wish to report a bug, or if you are interested in having us mirror your free-software or open-source project, please feel free to contact us at mirror[@]dogado.de.

Vignettes for baker: An R package for fitting nested partially latent class models

Zhenke Wu

January 29, 2024

This is a simple vignette; please see here for the more complete version.

1 Introduction

In this vignette, a sharply truncated sampling procedure is used to demonstrate use of the ‘baker’ package tools. Because we built the vignette locally, please check the inst/doc/ for the actual vignette files. We commented many of the following code segments because their running time is high on the CRAN server.

The data for the illustration are related to pathogen categorization in pneumonia. We will simulate the presence or absence of pathogens of these pathogens measured with error.

fname = file.path(
  "example_data", 
  "pathogen_category_simulation.csv")
fname = system.file(
  fname, 
  package = "baker")
demodat = read.csv(fname, stringsAsFactors = FALSE)
kable(head(demodat))
pathogen pathogen_type
A B
B V
C B
D V
E V
F B

2 Setup and Simulate Measurements

We first simulate data using NPLCM. We simulate data for controls and cases separately. Among controls, the disease class is termed “no infection”. To model the dependence among pathogen measurements, Wu et al 2016, Biostatistics introduced subclasses to characterize such dependence. In this simulation, we assume there are two subclasses (\(K=2\)). Among cases, there are a few disease classes that represent the true lung infections by pathogens \(1, 2, ..., L\) and another class called “None-of-the-above”. We don’t get to observe these disease classes and wish to use measurements peripheral to the lung to infer for each individual the probabilities of each pathogen infecting the lung as well as the fraction of pneumonia cases caused by each pathogen. We again assume two subclasses are nested within each of \(L+1\) disease classes. Controls and cases in a given disease class fall into subclasses with likely different probabilities, which we term as subclass weights; We assume the subclass weights for controls is \(\boldsymbol{\nu}=(0.5,0.5)\) and for cases \(\boldsymbol{\nu}\) for which the R code below chose a particular pair of values c(curr_mix,1-curr_mix).

# Note: the example will only run 100 Gibbs sampling steps to save computing time.
# To produce useful posterior inferences, please modify "mcmc_options" as follows
#                      "n.itermcmc" to 50000
#                      "n.burnin"   to 10000,
#                      "n.thin"     to 40,


working_dir <- tempdir() # <-- create a temporary directory.
#curd = getwd()
#randname = paste(curd, basename(tempfile()), sep="/") # need absolute path
#dir.create(randname)
#working_dir = randname

K.true  <- 2   # no. of latent subclasses in actual simulation. 
# If eta = c(1,0), K.true is effectively 1.
J       <- 6   # no. of pathogens.
N       <- 250 # no. of cases/controls.

# case subclass weight (five values):
subclass_mix_seq <- c(0,0.25,0.5,0.75,1)


NREP   <- 100
MYGRID <- expand.grid(list(rep   = 1:NREP, # data replication.
                           iter  = seq_along(subclass_mix_seq),# mixing weights.
                           k_fit = c(1,2), # model being fitted: 1 for pLCM; >1 for npLCM.
                           scn   = 3:1)    # index for different truth; see "scn_collection.R".
)

n_seed   <- nrow(unique(MYGRID[,-3]))
seed_seq <- rep(1:n_seed,times=length(unique(MYGRID[,3])))

SEG   <- 1 # The value could be 1 to nrow(MYGRID)=3000; here we just simulate one data set.
scn   <- MYGRID$scn[SEG]
k_fit <- 2#MYGRID$k_fit[SEG] 
iter  <- MYGRID$iter[SEG] 
rep   <- MYGRID$rep[SEG] 


# current parameters:
curr_mix <- subclass_mix_seq[iter]
lambda   <- c(0.5,0.5) #c(curr_mix,1-curr_mix)
eta      <- c(curr_mix,1-curr_mix) 

# set fixed simulation sequence:
seed_start <- 20161215  
set.seed(seed_start+seed_seq[SEG])

if (scn == 3){
  ThetaBS_withNA <- cbind(c(0.95,0.95,0.55,0.95,0.95,0.95),#subclass 1.
                          c(0.95,0.55,0.95,0.55,0.55,0.55))#subclass 2.
  PsiBS_withNA   <- cbind(c(0.4,0.4,0.05,0.2,0.2,0.2),     #subclass 1.
                          c(0.05,0.05,0.4,0.05,0.05,0.05)) #subclass 2.
}

if (scn == 2){
  ThetaBS_withNA <- cbind(c(0.95,0.9,0.85,0.9,0.9,0.9),   #subclass 1.
                          c(0.95,0.9,0.95,0.9,0.9,0.9))   #subclass 2.
  PsiBS_withNA   <- cbind(c(0.3,0.3,0.15,0.2,0.2,0.2),    #subclass 1.
                          c(0.15,0.15,0.3,0.05,0.05,0.05))#subclass 2.
}

if (scn == 1){
  ThetaBS_withNA <- cbind(c(0.95,0.9,0.9,0.9,0.9,0.9),#subclass 1.
                          c(0.95,0.9,0.9,0.9,0.9,0.9))#subclass 2.
  PsiBS_withNA   <- cbind(c(0.25,0.25,0.2,0.15,0.15,0.15),#subclass 1.
                          c(0.2,0.2,0.25,0.1,0.1,0.1))    #subclass 2.
}



# the following paramter names are set using names in the 'baker' package:
set_parameter <- list(
  cause_list      = c(LETTERS[1:J]),
  etiology        = c(0.5,0.2,0.15,0.05,0.05,0.05),# same length as cause_list.
  pathogen_BrS    = LETTERS[1:J],
  meas_nm         = list(MBS = c("MBS1")), # a single source of Bronze Standard (BrS) data.
  Lambda          = lambda,              #ctrl mix (subclass weights).
  Eta             = t(replicate(J,eta)), #case mix; # of rows equals length(cause_list).
  PsiBS           = PsiBS_withNA,
  ThetaBS         = ThetaBS_withNA,
  Nu      =     N, # control sample size.
  Nd      =     N  # case sample size.
)

# # visualize pairwise log odds ratios for cases and controls when eta changes 
# # from 0 to 1. In the following simulation, we just use one value: eta=0.
# example("compute_logOR_single_cause")

simu_out   <- simulate_nplcm(set_parameter)
data_nplcm <- simu_out$data_nplcm

3 Exploratory data analysis

Below, we visualize a matrix of pairwise log odds ratios (LOR) for cases (upper) and controls (lower). LOR is at the top of the cell. Below it, its standard error is in smaller type, using the same color as the LOR. Then the estimate is divided by its standard error. We put the actual value when the Z-statistics has an absolute value greater than 2; a plus (red) or minus (blue) if between 1 and 2; blank otherwise.

# specify cause list:
cause_list <- set_parameter$cause_list

# specify measurements:
# bronze-standard measurements:
patho_BrS_MBS1      <- set_parameter$pathogen_BrS
BrS_object_1        <- make_meas_object(patho_BrS_MBS1,"MBS","1","BrS",cause_list)
   # please use ?make_meas_object to see the measurement standards.



# pairwise log odds ratio plot:
pathogen_display <- BrS_object_1$patho
plot_logORmat(data_nplcm,pathogen_display,1)
## == Visualizing pairwise log odds ratios for bronze-standard data set:  1 :  MBS1 . ==

4 Model specification

m_opt1 <- list(likelihood   = list(cause_list = cause_list,               # <---- fitted causes.
                                   k_subclass = k_fit,                    # <---- no. of subclasses.
                                   Eti_formula = "~ 0",                   # <---- only apply FPR formula to specified slice of measurements; if not default to the first slice.
                                   FPR_formula = list(MBS1 = "~0")),      # <---- etiology regression formula.
               use_measurements = c("BrS"),                               # <---- which measurements to use to inform etiology
               prior        = list(Eti_prior   = overall_uniform(1, cause_list) ,                       # <--- etiology prior. 
                                   TPR_prior   = list(
                                     BrS  = list(info  = "informative",
                                                 input = "direct_beta_param",
                                                 val   = list(
                                                          MBS1 = list(alpha = list(rep(6,length(set_parameter$pathogen_BrS))),
                                                                      beta  = list(rep(2,length(set_parameter$pathogen_BrS)))
                                                                     )
                                                 )
                                                 
                                     )
                                     
                                   )# <---- TPR prior.
               )
)                       

model_options <- m_opt1
assign_model(model_options,data_nplcm)
## $num_slice
## MBS MSS MGS 
##   1   0   0 
## 
## $nested
## [1] TRUE
## 
## $regression
## $regression$do_reg_Eti
## [1] FALSE
## 
## $regression$do_reg_FPR
##  MBS1 
## FALSE 
## 
## $regression$is_discrete_predictor
## $regression$is_discrete_predictor$Eti
## [1] FALSE
## 
## $regression$is_discrete_predictor$FPR
##  MBS1 
## FALSE 
## 
## 
## 
## $BrS_grp
## [1] FALSE
## 
## $SS_grp
## [1] FALSE

5 Fitting the model

# date stamp for analysis:
Date     <- gsub("-", "_", Sys.Date())
# include stratification information in file name:
dated_strat_name    <- file.path(working_dir, 
                                 paste0("scn_",scn,"_mixiter_",iter))
if (dir.exists(dated_strat_name)) {
  unlink(dated_strat_name, force = TRUE)
}

# create folder
dir.create(dated_strat_name)
fullname <- dated_strat_name

# for finer scenarios, e.g., different types of analysis applicable to the
# same data set. Here we just perform one analysis:
result_folder <- file.path(
  fullname,
  paste0("rep_", rep, "_kfit_",
         model_options$likelihood$k_subclass))
dir.create(result_folder)


# options for MCMC chains:
mcmc_options <- list(
  individual.pred = !TRUE,
  ppd             = TRUE,
  n.chains   = 1,
  n.itermcmc = as.integer(200), #50000
  n.burnin   = as.integer(100), #10000
  n.thin     = 1, #50
  result.folder = result_folder,
  bugsmodel.dir = result_folder
)

# Record the settings of current analysis:
# data clean options:
fname = file.path(
  "example_data", 
  "pathogen_category_simulation.csv")
fname = system.file(
  fname, 
  package = "baker")
global_patho_taxo_dir = fname

clean_options <- list(
  BrS_objects        =  make_list(BrS_object_1),         # <---- all bronze-standard measurements.
  patho_taxo_dir = global_patho_taxo_dir,
  allow_missing      = FALSE)

# place the nplcm data and cleaning options into the results folder
dput(data_nplcm,file.path(mcmc_options$result.folder,"data_nplcm.txt")) 
dput(clean_options,file.path(mcmc_options$result.folder,"data_clean_options.txt"))

gs <- nplcm(data_nplcm, model_options, mcmc_options)

6 Visualizations

result_folder <- mcmc_options$result.folder

6.1 plot data, prior, and posteriors for all causative pathogens:

suppressWarnings(plot(gs, bg_color = NULL))

6.2 plot data, prior, and posterior for selected causes:

plot(gs, bg_color = NULL, select_latent = c("A","C"), exact = TRUE)

6.3 plot the joint posterior of the etiology fraction for any three causes:

6.4 model checking by comparing observed pairwise log odds ratios (LOR)

We compare observed LOR to the posterior predictive distributions of pairwise LOR; The numbers are (predicted LOR - observed LOR)/ s.e. (posterior predictive distribution of LOR); The closer to zero the better.

plot_check_pairwise_SLORD(result_folder, slice=1)

6.5 model checking by comparing observed frequencies of binary patterns to the model-predicted ones

dir_list <- as.list(c(result_folder))
plot_check_common_pattern(dir_list,slice_vec =c(1,1))

These binaries (installable software) and packages are in development.
They may not be fully stable and should be used with caution. We make no claims about them.
Health stats visible at Monitor.